Simulation (src/sim/): - SimGround holds the terrain heightfield (bilinear heights, normals) and axis-aligned box solids, with support, body-overlap, point and ray queries. The island generator and building will fill it. - Movement steps a player per tick: walk, sprint (forward only), crouch (lower body, slower, no jump), jump with exact constant-gravity integration, air control, step-up onto ledges up to STEP_HEIGHT, ground snapping on downhill walks, slopes over MAX_SLOPE_DEGREES that block walking and jumping uphill and make players slide (speed capped), ceiling bumps, sliding along walls, and fall damage from impact speed. - Gravity now applies on ticks with no command. on_ground and crouching are part of the state hash. New movement numbers are in Tuning. - Fixed the strafe direction: right is forward x up in Godot's frame, (-cos yaw, 0, sin yaw). Documented the look convention. Client (src/client/): - CameraRig places an over-the-shoulder camera with an eased aim-down-sights blend (closer, narrower FOV), casting against the same SimGround: pivot to shoulder, shoulder back, then a straight line from the pivot, with a final clearance pull-in so the near plane never enters geometry. - InputSettings: mouse sensitivity, aim sensitivity scale and invert-Y, clamped and saved to user://settings.cfg. PlayerCamera applies both. Tests: 46 new across movement, ground queries, camera and settings, including a 24,480-view scripted camera sweep through five arenas (wall, corridor, low roof, corner, steep bank) that checks the eye and every near-plane corner stay out of geometry with a clear line to the pivot. The hash test now flips a high stick bit, because a 1/127 nudge to an airborne player moves them less than the hash's millimetre. Capture scenarios camera, camera_wall and camera_aim. Closes #8 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
79 lines
2.8 KiB
GDScript
79 lines
2.8 KiB
GDScript
## The capture harness's test scene: a small shore with sea, sand, a breakwater and a
|
|
## post, under a procedural sky. Everything is built in code, so there are no assets.
|
|
extends Node3D
|
|
|
|
## The solid shape of the scene, for scenarios that need collision (the camera rig).
|
|
var ground: SimGround = SimGround.flat(0.0)
|
|
|
|
|
|
func _ready() -> void:
|
|
var environment: Environment = Environment.new()
|
|
var sky_material: ProceduralSkyMaterial = ProceduralSkyMaterial.new()
|
|
sky_material.sky_top_color = Color(0.32, 0.5, 0.68)
|
|
sky_material.sky_horizon_color = Color(0.82, 0.78, 0.68)
|
|
sky_material.ground_bottom_color = Color(0.18, 0.2, 0.2)
|
|
var sky: Sky = Sky.new()
|
|
sky.sky_material = sky_material
|
|
environment.background_mode = Environment.BG_SKY
|
|
environment.sky = sky
|
|
environment.ambient_light_source = Environment.AMBIENT_SOURCE_SKY
|
|
environment.ambient_light_energy = 0.35
|
|
environment.tonemap_mode = Environment.TONE_MAPPER_FILMIC
|
|
var world: WorldEnvironment = WorldEnvironment.new()
|
|
world.environment = environment
|
|
add_child(world)
|
|
|
|
var sun: DirectionalLight3D = DirectionalLight3D.new()
|
|
sun.rotation_degrees = Vector3(-38.0, -50.0, 0.0)
|
|
sun.light_energy = 0.75
|
|
sun.shadow_enabled = true
|
|
add_child(sun)
|
|
|
|
_box(Vector3(60.0, 1.0, 60.0), Vector3(0.0, -0.5, -10.0), Color(0.58, 0.5, 0.36))
|
|
_box(Vector3(200.0, 0.2, 200.0), Vector3(0.0, -0.3, 80.0), Color(0.07, 0.2, 0.26))
|
|
for index: int in 6:
|
|
var height: float = 1.4 + 0.25 * (index % 2)
|
|
var x: float = -7.5 + index * 3.0
|
|
_box(Vector3(2.6, height, 2.0), Vector3(x, height * 0.5, 4.0), Color(0.45, 0.42, 0.38))
|
|
_cylinder(0.35, 5.0, Vector3(5.0, 2.5, -2.0), Color(0.55, 0.36, 0.22))
|
|
_cylinder(0.6, 0.8, Vector3(5.0, 5.4, -2.0), Color(0.72, 0.22, 0.18))
|
|
|
|
_add_camera()
|
|
|
|
|
|
## Override to view the scene differently.
|
|
func _add_camera() -> void:
|
|
var camera: Camera3D = Camera3D.new()
|
|
camera.position = Vector3(-6.0, 6.0, -16.0)
|
|
add_child(camera)
|
|
camera.look_at(Vector3(1.0, 1.0, 2.0))
|
|
camera.make_current()
|
|
|
|
|
|
func _box(size: Vector3, at: Vector3, colour: Color) -> void:
|
|
var mesh: BoxMesh = BoxMesh.new()
|
|
mesh.size = size
|
|
_place(mesh, at, colour)
|
|
if at.y + size.y * 0.5 > 0.0:
|
|
ground.add_solid(AABB(at - size * 0.5, size))
|
|
|
|
|
|
func _cylinder(radius: float, height: float, at: Vector3, colour: Color) -> void:
|
|
ground.add_solid(AABB(at - Vector3(radius, height * 0.5, radius), Vector3(radius * 2.0, height, radius * 2.0)))
|
|
var mesh: CylinderMesh = CylinderMesh.new()
|
|
mesh.top_radius = radius
|
|
mesh.bottom_radius = radius
|
|
mesh.height = height
|
|
_place(mesh, at, colour)
|
|
|
|
|
|
func _place(mesh: PrimitiveMesh, at: Vector3, colour: Color) -> void:
|
|
var material: StandardMaterial3D = StandardMaterial3D.new()
|
|
material.albedo_color = colour
|
|
material.roughness = 0.85
|
|
mesh.material = material
|
|
var instance: MeshInstance3D = MeshInstance3D.new()
|
|
instance.mesh = mesh
|
|
instance.position = at
|
|
add_child(instance)
|