Simulation (src/sim/): - SimGround holds the terrain heightfield (bilinear heights, normals) and axis-aligned box solids, with support, body-overlap, point and ray queries. The island generator and building will fill it. - Movement steps a player per tick: walk, sprint (forward only), crouch (lower body, slower, no jump), jump with exact constant-gravity integration, air control, step-up onto ledges up to STEP_HEIGHT, ground snapping on downhill walks, slopes over MAX_SLOPE_DEGREES that block walking and jumping uphill and make players slide (speed capped), ceiling bumps, sliding along walls, and fall damage from impact speed. - Gravity now applies on ticks with no command. on_ground and crouching are part of the state hash. New movement numbers are in Tuning. - Fixed the strafe direction: right is forward x up in Godot's frame, (-cos yaw, 0, sin yaw). Documented the look convention. Client (src/client/): - CameraRig places an over-the-shoulder camera with an eased aim-down-sights blend (closer, narrower FOV), casting against the same SimGround: pivot to shoulder, shoulder back, then a straight line from the pivot, with a final clearance pull-in so the near plane never enters geometry. - InputSettings: mouse sensitivity, aim sensitivity scale and invert-Y, clamped and saved to user://settings.cfg. PlayerCamera applies both. Tests: 46 new across movement, ground queries, camera and settings, including a 24,480-view scripted camera sweep through five arenas (wall, corridor, low roof, corner, steep bank) that checks the eye and every near-plane corner stay out of geometry with a clear line to the pivot. The hash test now flips a high stick bit, because a 1/127 nudge to an airborne player moves them less than the hash's millimetre. Capture scenarios camera, camera_wall and camera_aim. Closes #8 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
27 lines
887 B
GDScript
27 lines
887 B
GDScript
## Capture scenario for the third-person camera: the shore scene with a stand-in player,
|
|
## viewed through PlayerCamera and CameraRig as in the game.
|
|
extends "res://test/capture/smoke_scene.gd"
|
|
|
|
@export var feet: Vector3 = Vector3(1.0, 0.0, 0.5)
|
|
@export var yaw_degrees: float = 0.0
|
|
@export var pitch_degrees: float = -8.0
|
|
@export var aiming: bool = false
|
|
|
|
|
|
func _add_camera() -> void:
|
|
var body: CapsuleMesh = CapsuleMesh.new()
|
|
body.radius = Tuning.PLAYER_RADIUS
|
|
body.height = Tuning.PLAYER_HEIGHT
|
|
_place(body, feet + Vector3.UP * Tuning.PLAYER_HEIGHT * 0.5, Color(0.2, 0.42, 0.36))
|
|
var camera: PlayerCamera = PlayerCamera.new()
|
|
camera.ground = ground
|
|
camera.target_feet = feet
|
|
camera.yaw = deg_to_rad(yaw_degrees)
|
|
camera.pitch = deg_to_rad(pitch_degrees)
|
|
camera.aiming = aiming
|
|
if aiming:
|
|
camera.rig.aim_blend = 1.0
|
|
add_child(camera)
|
|
camera.make_current()
|
|
camera.snap()
|