Valkey was emitting password-related warnings when used as a dependency
because empty-password mode was always enabled, even when a password was
configured. This updates Valkey to behave like Redis in both password
and no-password deployments, so it remains a drop-in replacement.
- **What changed**
- `charts/incubator/valkey/values.yaml`
- Made `ALLOW_EMPTY_PASSWORD` conditional on whether `password` is
empty.
- Keeps `REDIS_*` env contract unchanged for compatibility with existing
dependency consumers.
- `charts/incubator/valkey/ci/no-password-values.yaml`
- Added explicit no-password CI values scenario (`password: ""`) to
cover the empty-password path.
- `charts/incubator/valkey/Chart.yaml`
- Bumped chart version from `0.0.3` to `0.0.4`.
- **Behavioral impact**
- Password set → empty-password mode is disabled (`ALLOW_EMPTY_PASSWORD:
"no"`), preventing warning noise.
- Password unset/empty → empty-password mode is enabled
(`ALLOW_EMPTY_PASSWORD: "yes"`), preserving expected unauthenticated
behavior.
```yaml
# charts/incubator/valkey/values.yaml
workload:
main:
podSpec:
containers:
main:
env:
ALLOW_EMPTY_PASSWORD: '{{ ternary "yes" "no" (empty .Values.password) }}'
REDIS_PASSWORD: "{{ .Values.password }}"
```
> [!WARNING]
>
> <details>
> <summary>Firewall rules blocked me from connecting to one or more
addresses (expand for details)</summary>
>
> #### I tried to connect to the following addresses, but was blocked by
firewall rules:
>
> - `oci.trueforge.org`
> - Triggering command: `/usr/local/bin/helm helm dependency build
/home/REDACTED/work/truecharts/truecharts/charts/incubator/valkey` (dns
block)
>
> If you need me to access, download, or install something from one of
these locations, you can either:
>
> - Configure [Actions setup
steps](https://gh.io/copilot/actions-setup-steps) to set up my
environment, which run before the firewall is enabled
> - Add the appropriate URLs or hosts to the custom allowlist in this
repository's [Copilot coding agent
settings](https://github.com/trueforge-org/truecharts/settings/copilot/coding_agent)
(admins only)
>
> </details>
<!-- START COPILOT CODING AGENT TIPS -->
---
✨ Let Copilot coding agent [set things up for
you](https://github.com/trueforge-org/truecharts/issues/new?title=✨+Set+up+Copilot+instructions&body=Configure%20instructions%20for%20this%20repository%20as%20documented%20in%20%5BBest%20practices%20for%20Copilot%20coding%20agent%20in%20your%20repository%5D%28https://gh.io/copilot-coding-agent-tips%29%2E%0A%0A%3COnboard%20this%20repo%3E&assignees=copilot)
— coding agent works faster and does higher quality work when set up for
your repo.
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/scratch](https://ghcr.io/trueforge-org/scratch)
([source](https://hub.docker.com/_/ubuntu)) | digest | `b6f7b7d` →
`a2defdd` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2NvbW1vbiIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
Signed-off-by: Alfred Göppel <43101280+alfi0812@users.noreply.github.com>
Co-authored-by: Alfred Göppel <43101280+alfi0812@users.noreply.github.com>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/valkey-tools](https://ghcr.io/trueforge-org/valkey-tools)
([source](https://truecharts.org)) | digest | `0a3c02a` → `931adcd` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2NvbW1vbiIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
This PR updates the Redis→Valkey migration to use the requested Valkey
chart version `0.0.2`.
All previously migrated stable charts now reference `valkey` at `0.0.2`,
with chart versions incremented accordingly.
- **Dependency version update**
- Updated stable chart dependencies from:
- `name: valkey`
- `version: 0.0.1`
- to:
- `name: valkey`
- `version: 0.0.2`
- **Chart metadata alignment**
- Bumped `Chart.yaml` patch version for each modified chart to keep
chart versioning consistent with dependency changes.
- **Compatibility preserved**
- Kept existing dependency wiring unchanged (`condition: redis.enabled`,
`alias: redis`) so chart values and toggles continue to resolve through
the same key path.
```yaml
dependencies:
- name: valkey
version: 0.0.2
repository: oci://oci.trueforge.org/truecharts
condition: redis.enabled
alias: redis
```
<!-- START COPILOT CODING AGENT TIPS -->
---
💡 You can make Copilot smarter by setting up custom instructions,
customizing its development environment and configuring Model Context
Protocol (MCP) servers. Learn more [Copilot coding agent
tips](https://gh.io/copilot-coding-agent-tips) in the docs.
---------
Signed-off-by: Kjeld Schouten <info@kjeldschouten.nl>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
Co-authored-by: Kjeld Schouten <info@kjeldschouten.nl>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/renovate](https://ghcr.io/trueforge-org/renovate)
([source](https://redirect.github.com/renovate/renovate)) | patch |
`01fa77f` → `dcfa428` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3Jlbm92YXRlIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9wYXRjaCJdfQ==-->
`incubator/valkey` still used Redis CLI references in probe scripts,
which made the chart inconsistent with Valkey naming. This update aligns
healthcheck command paths with Valkey while keeping existing runtime
compatibility env vars intact.
- **Probe command alignment**
- Updated all health probe scripts in
`charts/incubator/valkey/values.yaml` to call `valkey-cli` instead of
`redis-cli`:
- `ping_readiness_local.sh`
- `ping_liveness_local.sh`
- `ping_readiness_master.sh`
- `ping_liveness_master.sh`
- **Chart metadata**
- Bumped `charts/incubator/valkey/Chart.yaml` version:
- `0.0.2` → `0.0.3`
- **Representative change**
```bash
- redis-cli -h localhost -p $REDIS_PORT ping
+ valkey-cli -h localhost -p $REDIS_PORT ping
```
> [!WARNING]
>
> <details>
> <summary>Firewall rules blocked me from connecting to one or more
addresses (expand for details)</summary>
>
> #### I tried to connect to the following addresses, but was blocked by
firewall rules:
>
> - `oci.trueforge.org`
> - Triggering command: `/usr/local/bin/helm helm dependency build` (dns
block)
>
> If you need me to access, download, or install something from one of
these locations, you can either:
>
> - Configure [Actions setup
steps](https://gh.io/copilot/actions-setup-steps) to set up my
environment, which run before the firewall is enabled
> - Add the appropriate URLs or hosts to the custom allowlist in this
repository's [Copilot coding agent
settings](https://github.com/trueforge-org/truecharts/settings/copilot/coding_agent)
(admins only)
>
> </details>
<!-- START COPILOT CODING AGENT TIPS -->
---
💬 We'd love your input! Share your thoughts on Copilot coding agent in
our [2 minute survey](https://gh.io/copilot-coding-agent-survey).
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
Lint runs were emitting `ls: cannot access '.../ci/*values.yaml'` for
charts that do not define CI override files (e.g.
`charts/stable/friendica`). The issue came from using `ls` as a glob
existence check in `tc-lint.sh`.
- **Root cause**
- `helm_lint()` used `ls $chart_path/ci/*values.yaml` inside a
conditional; when the glob had no matches, `ls` printed an error.
- **Change**
- Replaced the `ls`-based check with a silent glob match check using
`compgen -G`.
- Scope is limited to `.github/scripts/tc-lint.sh` and preserves
existing lint decision logic.
- **Behavioral impact**
- Charts without `ci/*values.yaml` no longer produce noisy shell errors
during lint.
- Existing lint pass/fail behavior remains unchanged.
```bash
# before
if [[ ! $(ls $chart_path/ci/*values.yaml) ]]; then
# after
if ! compgen -G "$chart_path/ci/*values.yaml" >/dev/null; then
```
<!-- START COPILOT CODING AGENT TIPS -->
---
💬 We'd love your input! Share your thoughts on Copilot coding agent in
our [2 minute survey](https://gh.io/copilot-coding-agent-survey).
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/kubectl](https://ghcr.io/trueforge-org/kubectl)
([source](https://redirect.github.com/Jackett/Jackett)) | digest |
`076f97d` → `87582bc` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2NvbW1vbiIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[mongodb](https://trueforge.org/truetech/truecharts/charts/stable/mongodb)
([source](https://redirect.github.com/bitnami/bitnami-docker-mongodb)) |
patch | `16.14.23` → `16.14.24` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3lvdXR1YmVkbC1tYXRlcmlhbCIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[docker.io/ghostfolio/ghostfolio](https://redirect.github.com/ghostfolio/ghostfolio)
| minor | `9236953` → `1753884` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Release Notes
<details>
<summary>ghostfolio/ghostfolio
(docker.io/ghostfolio/ghostfolio)</summary>
###
[`v2.239.0`](https://redirect.github.com/ghostfolio/ghostfolio/blob/HEAD/CHANGELOG.md#22390---2026-02-15)
[Compare
Source](https://redirect.github.com/ghostfolio/ghostfolio/compare/2.238.0...2.239.0)
##### Added
- Added a new static portfolio analysis rule based on the total
investment volume: *Fees* (Fee Ratio)
- Extended the content of the *Self-Hosting* section on the Frequently
Asked Questions (FAQ) page with information on derived currencies
##### Changed
- Deprecated the existing static portfolio analysis rule: *Fees* (Fee
Ratio)
- Ignored nested ETFs when fetching top holdings for ETF and mutual fund
assets from *Yahoo Finance*
- Improved the scraper configuration with more detailed error messages
- Improved the language localization for German (`de`)
- Upgraded `@simplewebauthn/browser` and `@simplewebauthn/server` from
version `13.1.0` to `13.2.2`
- Upgraded `cheerio` from version `1.0.0` to `1.2.0`
##### Fixed
- Fixed the investment value by including currency effects in the
portfolio summary tab on the home page
- Added the missing `valueInBaseCurrency` to the response of the import
activities endpoint
</details>
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2dob3N0Zm9saW8iLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL21pbm9yIl19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/phalcode/gamevault-backend | minor | `e2c8558` → `6eb5fbb` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2dhbWV2YXVsdC1iYWNrZW5kIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9taW5vciJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[memcached](https://trueforge.org/truetech/truecharts/charts/stable/memcached)
([source](https://redirect.github.com/bitnami/bitnami-docker-memcached))
| patch | `16.14.20` → `16.14.21` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2dpdGVhIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9wYXRjaCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| ghcr.io/g0ldyy/comet | digest | `204596c` → `2fa7f48` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2NvbWV0IiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/speedtest-tracker](https://redirect.github.com/linuxserver/docker-speedtest-tracker/packages)
([source](https://redirect.github.com/linuxserver/docker-speedtest-tracker))
| digest | `d681fae` → `00f1b34` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3NwZWVkdGVzdC10cmFja2VyIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[clickhouse](https://trueforge.org/truetech/truecharts/charts/stable/clickhouse)
([source](https://clickhouse.com/)) | patch | `17.0.1` → `17.0.2` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3BsYXVzaWJsZSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/firefox](https://redirect.github.com/linuxserver/docker-firefox/packages)
([source](https://redirect.github.com/linuxserver/docker-firefox)) |
digest | `648178c` → `e87049f` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2ZpcmVmb3giLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/orcaslicer](https://redirect.github.com/linuxserver/docker-orcaslicer/packages)
([source](https://redirect.github.com/linuxserver/docker-orcaslicer)) |
digest | `bc04256` → `0c41512` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL29yY2FzbGljZXIiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/airsonic-advanced](https://ghcr.io/trueforge-org/airsonic-advanced)
([source](https://redirect.github.com/kagemomiji/airsonic-advanced)) |
digest | `4c1f2b5` → `19e85bc` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2FpcnNvbmljLWFkdmFuY2VkIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| yourls | digest | `90ad61d` → `16020cb` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3lvdXJscyIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/bitnamisecure/valkey | pinDigest | → `14dc12c` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3ZhbGtleSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGluIl19-->
This PR introduces a new `charts/incubator/valkey` chart using
`charts/stable/redis` as the baseline, so Valkey has an incubator chart
with equivalent defaults and structure. The chart metadata and docs were
minimally adapted to Valkey while preserving Redis-compatible runtime
behavior where required by the upstream image.
- **Chart bootstrap (redis → valkey)**
- Added `charts/incubator/valkey` by copying the stable Redis chart
layout and assets (`templates`, `ci`, icons, helmignore, values).
- Set chart identity and train to incubator in `Chart.yaml` (`name:
valkey`, train annotations updated).
- **Metadata and documentation alignment**
- Updated chart URLs/sources/icon/install/docs references from Redis
paths to Valkey/incubator paths.
- Replaced inherited Redis changelog history with a fresh initial Valkey
entry.
- **Valkey-specific defaults with compatibility retained**
- Switched image repository to `docker.io/bitnamisecure/valkey`.
- Updated data mount path to `/bitnami/valkey`.
- Kept `REDIS_*` env variable usage (with explicit compatibility note)
to match Bitnami Valkey image conventions.
- Updated loading-status strings and health persistence key naming for
Valkey consistency.
- Updated CI override from `redisPassword` to `password` to match chart
values.
```yaml
# charts/incubator/valkey/Chart.yaml
annotations:
truecharts.org/train: incubator
name: valkey
# charts/incubator/valkey/values.yaml
image:
repository: docker.io/bitnamisecure/valkey
volumeClaimTemplates:
data:
mountPath: "/bitnami/valkey"
```
> [!WARNING]
>
> <details>
> <summary>Firewall rules blocked me from connecting to one or more
addresses (expand for details)</summary>
>
> #### I tried to connect to the following addresses, but was blocked by
firewall rules:
>
> - `oci.trueforge.org`
> - Triggering command: `/usr/local/bin/helm helm dependency build` (dns
block)
>
> If you need me to access, download, or install something from one of
these locations, you can either:
>
> - Configure [Actions setup
steps](https://gh.io/copilot/actions-setup-steps) to set up my
environment, which run before the firewall is enabled
> - Add the appropriate URLs or hosts to the custom allowlist in this
repository's [Copilot coding agent
settings](https://github.com/trueforge-org/truecharts/settings/copilot/coding_agent)
(admins only)
>
> </details>
<!-- START COPILOT CODING AGENT TIPS -->
---
✨ Let Copilot coding agent [set things up for
you](https://github.com/trueforge-org/truecharts/issues/new?title=✨+Set+up+Copilot+instructions&body=Configure%20instructions%20for%20this%20repository%20as%20documented%20in%20%5BBest%20practices%20for%20Copilot%20coding%20agent%20in%20your%20repository%5D%28https://gh.io/copilot-coding-agent-tips%29%2E%0A%0A%3COnboard%20this%20repo%3E&assignees=copilot)
— coding agent works faster and does higher quality work when set up for
your repo.
---------
Signed-off-by: Kjeld Schouten <info@kjeldschouten.nl>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
Co-authored-by: Kjeld Schouten <info@kjeldschouten.nl>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
This updates repository Copilot guidance to reflect two workflow
requirements from the issue: include `pre-commit` in expected checks,
and require test updates in `common-test` when `common` changes.
- **Copilot instruction updates**
- Added explicit instruction to run `pre-commit` before finalizing
changes.
- Added explicit instruction to keep Helm unit tests in
`charts/library/common-test` aligned with edits in
`charts/library/common`.
- **Scope**
- Changes are limited to `.github/copilot-instructions.md`
(documentation/config guidance only).
```md
- Run `pre-commit` on your changes before finalizing.
- When editing `charts/library/common`, also update the Helm unit tests in `charts/library/common-test` accordingly.
```
<!-- START COPILOT CODING AGENT TIPS -->
---
💬 We'd love your input! Share your thoughts on Copilot coding agent in
our [2 minute survey](https://gh.io/copilot-coding-agent-survey).
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[common](https://trueforge.org/truetech/truecharts/charts/library/common)
([source](https://ghcr.io/cloudnative-pg/postgis)) | patch | `28.29.49`
→ `28.29.59` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3p3YXZlanMybXF0dCIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
Signed-off-by: Kjeld Schouten <info@kjeldschouten.nl>
Co-authored-by: Kjeld Schouten <info@kjeldschouten.nl>
Running chart linting across all charts surfaced systemic YAML
`empty-lines` failures at EOF, plus one genuine spacing violation in the
common chart values. This PR updates lint behavior to match chart file
conventions and fixes the remaining content-level violation.
- **Lint rule alignment (repo-wide)**
- Updated `.github/yaml-lint-conf.yaml` to allow a single trailing blank
line at file end:
- `empty-lines.max-end: 0` → `1`
- This removes repetitive false-positive failures across chart
`Chart.yaml` files that share the same EOF formatting pattern.
- **Common chart values cleanup**
- Removed an extra blank line in `charts/library/common/values.yaml`
(`notes` template block) that exceeded `empty-lines.max`.
- **Required chart version bump**
- Bumped `charts/library/common/Chart.yaml` version to reflect non-doc
changes under the common chart path:
- `28.29.59` → `28.29.60`
```yaml
# .github/yaml-lint-conf.yaml
empty-lines:
max: 1
max-start: 0
max-end: 1
```
> [!WARNING]
>
> <details>
> <summary>Firewall rules blocked me from connecting to one or more
addresses (expand for details)</summary>
>
> #### I tried to connect to the following addresses, but was blocked by
firewall rules:
>
> - `charts.jetstack.io`
> - Triggering command: `/usr/local/bin/helm helm repo add jetstack
REDACTED ', @ARGV mp/status cal/bin/yamale r/bin/bash',
'-cyamllint r /tmp/status p/bin/perl perl .yam hema.yaml
nstar2mqtt/Chart.yaml /opt/pipx_bin/perl r/bin/bash', '-cyamale
/tmp/status` (dns block)
> - `oci.trueforge.org`
> - Triggering command: `./temp/forgetool ./temp/forgetool charts deps
charts/stable/redmine charts/stable/owi2plex charts/stable/littlelink
charts/stable/syncthing charts/stable/bitcoinunlimited
charts/stable/yacy charts/stable/kerio-connect charts/stable/barotrauma
charts/stable/fenrus charts/stable/lastoasis charts/stable/picoshare
charts/stable/archivebox charts/stable/freecad-desktop-g3
charts/stable/booklore charts/stable/zwavejs2mqtt
charts/stable/nginx-proxy-manager charts/stable/fileflows` (dns block)
> - `pool.ntp.org`
> - Triggering command: `./temp/forgetool ./temp/forgetool charts deps
charts/stable/redmine charts/stable/owi2plex charts/stable/littlelink
charts/stable/syncthing charts/stable/bitcoinunlimited
charts/stable/yacy charts/stable/kerio-connect charts/stable/barotrauma
charts/stable/fenrus charts/stable/lastoasis charts/stable/picoshare
charts/stable/archivebox charts/stable/freecad-desktop-g3
charts/stable/booklore charts/stable/zwavejs2mqtt
charts/stable/nginx-proxy-manager charts/stable/fileflows` (dns block)
>
> If you need me to access, download, or install something from one of
these locations, you can either:
>
> - Configure [Actions setup
steps](https://gh.io/copilot/actions-setup-steps) to set up my
environment, which run before the firewall is enabled
> - Add the appropriate URLs or hosts to the custom allowlist in this
repository's [Copilot coding agent
settings](https://github.com/trueforge-org/truecharts/settings/copilot/coding_agent)
(admins only)
>
> </details>
<!-- START COPILOT CODING AGENT TIPS -->
---
💡 You can make Copilot smarter by setting up custom instructions,
customizing its development environment and configuring Model Context
Protocol (MCP) servers. Learn more [Copilot coding agent
tips](https://gh.io/copilot-coding-agent-tips) in the docs.
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/renovate](https://ghcr.io/trueforge-org/renovate)
([source](https://redirect.github.com/renovate/renovate)) | minor |
`a478ba3` → `01fa77f` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3Jlbm92YXRlIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9taW5vciJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/cloudreve/cloudreve | patch | `40f427e` → `bfe2a29` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2Nsb3VkcmV2ZSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/medusa](https://redirect.github.com/linuxserver/docker-medusa/packages)
([source](https://redirect.github.com/linuxserver/docker-medusa)) |
digest | `478ab30` → `07538c8` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL21lZHVzYSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/alpine/socat | digest | `35aa182` → `accce73` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2plbGx5ZmluIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/plex](https://ghcr.io/trueforge-org/plex)
([source](https://redirect.github.com/plexinc/pms-docker)) | digest |
`332ce65` → `3e5527c` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3BsZXgiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| adminer | digest | `d9498e3` → `2fb88b9` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2FkbWluZXIiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[docker.io/semaphoreui/semaphore](https://redirect.github.com/semaphoreui/semaphore)
| patch | `c213bd7` → `227f54f` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Release Notes
<details>
<summary>semaphoreui/semaphore
(docker.io/semaphoreui/semaphore)</summary>
###
[`v2.17.2`](https://redirect.github.com/semaphoreui/semaphore/compare/v2.17.0...v2.17.2)
[Compare
Source](https://redirect.github.com/semaphoreui/semaphore/compare/v2.17.0...v2.17.2)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3NlbWFwaG9yZSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/renovate](https://ghcr.io/trueforge-org/renovate)
([source](https://redirect.github.com/renovate/renovate)) | patch |
`ba922b8` → `a478ba3` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3Jlbm92YXRlIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9wYXRjaCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| ghcr.io/agregarr/agregarr | minor | `87ea4f0` → `5f638ef` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2FncmVnYXJyIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9taW5vciJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/iyuucn/iyuuplus | digest | `6b951ba` → `89c1204` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2l5dXVwbHVzIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
Kjeld Schouten