This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/kubectl](https://ghcr.io/trueforge-org/kubectl)
([source](https://redirect.github.com/Jackett/Jackett)) | digest |
`076f97d` → `87582bc` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2NvbW1vbiIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[mongodb](https://trueforge.org/truetech/truecharts/charts/stable/mongodb)
([source](https://redirect.github.com/bitnami/bitnami-docker-mongodb)) |
patch | `16.14.23` → `16.14.24` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3lvdXR1YmVkbC1tYXRlcmlhbCIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[docker.io/ghostfolio/ghostfolio](https://redirect.github.com/ghostfolio/ghostfolio)
| minor | `9236953` → `1753884` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Release Notes
<details>
<summary>ghostfolio/ghostfolio
(docker.io/ghostfolio/ghostfolio)</summary>
###
[`v2.239.0`](https://redirect.github.com/ghostfolio/ghostfolio/blob/HEAD/CHANGELOG.md#22390---2026-02-15)
[Compare
Source](https://redirect.github.com/ghostfolio/ghostfolio/compare/2.238.0...2.239.0)
##### Added
- Added a new static portfolio analysis rule based on the total
investment volume: *Fees* (Fee Ratio)
- Extended the content of the *Self-Hosting* section on the Frequently
Asked Questions (FAQ) page with information on derived currencies
##### Changed
- Deprecated the existing static portfolio analysis rule: *Fees* (Fee
Ratio)
- Ignored nested ETFs when fetching top holdings for ETF and mutual fund
assets from *Yahoo Finance*
- Improved the scraper configuration with more detailed error messages
- Improved the language localization for German (`de`)
- Upgraded `@simplewebauthn/browser` and `@simplewebauthn/server` from
version `13.1.0` to `13.2.2`
- Upgraded `cheerio` from version `1.0.0` to `1.2.0`
##### Fixed
- Fixed the investment value by including currency effects in the
portfolio summary tab on the home page
- Added the missing `valueInBaseCurrency` to the response of the import
activities endpoint
</details>
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2dob3N0Zm9saW8iLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL21pbm9yIl19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/phalcode/gamevault-backend | minor | `e2c8558` → `6eb5fbb` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2dhbWV2YXVsdC1iYWNrZW5kIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9taW5vciJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[memcached](https://trueforge.org/truetech/truecharts/charts/stable/memcached)
([source](https://redirect.github.com/bitnami/bitnami-docker-memcached))
| patch | `16.14.20` → `16.14.21` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2dpdGVhIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9wYXRjaCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| ghcr.io/g0ldyy/comet | digest | `204596c` → `2fa7f48` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2NvbWV0IiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/speedtest-tracker](https://redirect.github.com/linuxserver/docker-speedtest-tracker/packages)
([source](https://redirect.github.com/linuxserver/docker-speedtest-tracker))
| digest | `d681fae` → `00f1b34` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3NwZWVkdGVzdC10cmFja2VyIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[clickhouse](https://trueforge.org/truetech/truecharts/charts/stable/clickhouse)
([source](https://clickhouse.com/)) | patch | `17.0.1` → `17.0.2` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3BsYXVzaWJsZSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/firefox](https://redirect.github.com/linuxserver/docker-firefox/packages)
([source](https://redirect.github.com/linuxserver/docker-firefox)) |
digest | `648178c` → `e87049f` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2ZpcmVmb3giLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/orcaslicer](https://redirect.github.com/linuxserver/docker-orcaslicer/packages)
([source](https://redirect.github.com/linuxserver/docker-orcaslicer)) |
digest | `bc04256` → `0c41512` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL29yY2FzbGljZXIiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/airsonic-advanced](https://ghcr.io/trueforge-org/airsonic-advanced)
([source](https://redirect.github.com/kagemomiji/airsonic-advanced)) |
digest | `4c1f2b5` → `19e85bc` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2FpcnNvbmljLWFkdmFuY2VkIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| yourls | digest | `90ad61d` → `16020cb` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3lvdXJscyIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/bitnamisecure/valkey | pinDigest | → `14dc12c` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3ZhbGtleSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGluIl19-->
This PR introduces a new `charts/incubator/valkey` chart using
`charts/stable/redis` as the baseline, so Valkey has an incubator chart
with equivalent defaults and structure. The chart metadata and docs were
minimally adapted to Valkey while preserving Redis-compatible runtime
behavior where required by the upstream image.
- **Chart bootstrap (redis → valkey)**
- Added `charts/incubator/valkey` by copying the stable Redis chart
layout and assets (`templates`, `ci`, icons, helmignore, values).
- Set chart identity and train to incubator in `Chart.yaml` (`name:
valkey`, train annotations updated).
- **Metadata and documentation alignment**
- Updated chart URLs/sources/icon/install/docs references from Redis
paths to Valkey/incubator paths.
- Replaced inherited Redis changelog history with a fresh initial Valkey
entry.
- **Valkey-specific defaults with compatibility retained**
- Switched image repository to `docker.io/bitnamisecure/valkey`.
- Updated data mount path to `/bitnami/valkey`.
- Kept `REDIS_*` env variable usage (with explicit compatibility note)
to match Bitnami Valkey image conventions.
- Updated loading-status strings and health persistence key naming for
Valkey consistency.
- Updated CI override from `redisPassword` to `password` to match chart
values.
```yaml
# charts/incubator/valkey/Chart.yaml
annotations:
truecharts.org/train: incubator
name: valkey
# charts/incubator/valkey/values.yaml
image:
repository: docker.io/bitnamisecure/valkey
volumeClaimTemplates:
data:
mountPath: "/bitnami/valkey"
```
> [!WARNING]
>
> <details>
> <summary>Firewall rules blocked me from connecting to one or more
addresses (expand for details)</summary>
>
> #### I tried to connect to the following addresses, but was blocked by
firewall rules:
>
> - `oci.trueforge.org`
> - Triggering command: `/usr/local/bin/helm helm dependency build` (dns
block)
>
> If you need me to access, download, or install something from one of
these locations, you can either:
>
> - Configure [Actions setup
steps](https://gh.io/copilot/actions-setup-steps) to set up my
environment, which run before the firewall is enabled
> - Add the appropriate URLs or hosts to the custom allowlist in this
repository's [Copilot coding agent
settings](https://github.com/trueforge-org/truecharts/settings/copilot/coding_agent)
(admins only)
>
> </details>
<!-- START COPILOT CODING AGENT TIPS -->
---
✨ Let Copilot coding agent [set things up for
you](https://github.com/trueforge-org/truecharts/issues/new?title=✨+Set+up+Copilot+instructions&body=Configure%20instructions%20for%20this%20repository%20as%20documented%20in%20%5BBest%20practices%20for%20Copilot%20coding%20agent%20in%20your%20repository%5D%28https://gh.io/copilot-coding-agent-tips%29%2E%0A%0A%3COnboard%20this%20repo%3E&assignees=copilot)
— coding agent works faster and does higher quality work when set up for
your repo.
---------
Signed-off-by: Kjeld Schouten <info@kjeldschouten.nl>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
Co-authored-by: Kjeld Schouten <info@kjeldschouten.nl>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
This updates repository Copilot guidance to reflect two workflow
requirements from the issue: include `pre-commit` in expected checks,
and require test updates in `common-test` when `common` changes.
- **Copilot instruction updates**
- Added explicit instruction to run `pre-commit` before finalizing
changes.
- Added explicit instruction to keep Helm unit tests in
`charts/library/common-test` aligned with edits in
`charts/library/common`.
- **Scope**
- Changes are limited to `.github/copilot-instructions.md`
(documentation/config guidance only).
```md
- Run `pre-commit` on your changes before finalizing.
- When editing `charts/library/common`, also update the Helm unit tests in `charts/library/common-test` accordingly.
```
<!-- START COPILOT CODING AGENT TIPS -->
---
💬 We'd love your input! Share your thoughts on Copilot coding agent in
our [2 minute survey](https://gh.io/copilot-coding-agent-survey).
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[common](https://trueforge.org/truetech/truecharts/charts/library/common)
([source](https://ghcr.io/cloudnative-pg/postgis)) | patch | `28.29.49`
→ `28.29.59` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3p3YXZlanMybXF0dCIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
Signed-off-by: Kjeld Schouten <info@kjeldschouten.nl>
Co-authored-by: Kjeld Schouten <info@kjeldschouten.nl>
Running chart linting across all charts surfaced systemic YAML
`empty-lines` failures at EOF, plus one genuine spacing violation in the
common chart values. This PR updates lint behavior to match chart file
conventions and fixes the remaining content-level violation.
- **Lint rule alignment (repo-wide)**
- Updated `.github/yaml-lint-conf.yaml` to allow a single trailing blank
line at file end:
- `empty-lines.max-end: 0` → `1`
- This removes repetitive false-positive failures across chart
`Chart.yaml` files that share the same EOF formatting pattern.
- **Common chart values cleanup**
- Removed an extra blank line in `charts/library/common/values.yaml`
(`notes` template block) that exceeded `empty-lines.max`.
- **Required chart version bump**
- Bumped `charts/library/common/Chart.yaml` version to reflect non-doc
changes under the common chart path:
- `28.29.59` → `28.29.60`
```yaml
# .github/yaml-lint-conf.yaml
empty-lines:
max: 1
max-start: 0
max-end: 1
```
> [!WARNING]
>
> <details>
> <summary>Firewall rules blocked me from connecting to one or more
addresses (expand for details)</summary>
>
> #### I tried to connect to the following addresses, but was blocked by
firewall rules:
>
> - `charts.jetstack.io`
> - Triggering command: `/usr/local/bin/helm helm repo add jetstack
REDACTED ', @ARGV mp/status cal/bin/yamale r/bin/bash',
'-cyamllint r /tmp/status p/bin/perl perl .yam hema.yaml
nstar2mqtt/Chart.yaml /opt/pipx_bin/perl r/bin/bash', '-cyamale
/tmp/status` (dns block)
> - `oci.trueforge.org`
> - Triggering command: `./temp/forgetool ./temp/forgetool charts deps
charts/stable/redmine charts/stable/owi2plex charts/stable/littlelink
charts/stable/syncthing charts/stable/bitcoinunlimited
charts/stable/yacy charts/stable/kerio-connect charts/stable/barotrauma
charts/stable/fenrus charts/stable/lastoasis charts/stable/picoshare
charts/stable/archivebox charts/stable/freecad-desktop-g3
charts/stable/booklore charts/stable/zwavejs2mqtt
charts/stable/nginx-proxy-manager charts/stable/fileflows` (dns block)
> - `pool.ntp.org`
> - Triggering command: `./temp/forgetool ./temp/forgetool charts deps
charts/stable/redmine charts/stable/owi2plex charts/stable/littlelink
charts/stable/syncthing charts/stable/bitcoinunlimited
charts/stable/yacy charts/stable/kerio-connect charts/stable/barotrauma
charts/stable/fenrus charts/stable/lastoasis charts/stable/picoshare
charts/stable/archivebox charts/stable/freecad-desktop-g3
charts/stable/booklore charts/stable/zwavejs2mqtt
charts/stable/nginx-proxy-manager charts/stable/fileflows` (dns block)
>
> If you need me to access, download, or install something from one of
these locations, you can either:
>
> - Configure [Actions setup
steps](https://gh.io/copilot/actions-setup-steps) to set up my
environment, which run before the firewall is enabled
> - Add the appropriate URLs or hosts to the custom allowlist in this
repository's [Copilot coding agent
settings](https://github.com/trueforge-org/truecharts/settings/copilot/coding_agent)
(admins only)
>
> </details>
<!-- START COPILOT CODING AGENT TIPS -->
---
💡 You can make Copilot smarter by setting up custom instructions,
customizing its development environment and configuring Model Context
Protocol (MCP) servers. Learn more [Copilot coding agent
tips](https://gh.io/copilot-coding-agent-tips) in the docs.
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: PrivatePuffin <7613738+PrivatePuffin@users.noreply.github.com>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/renovate](https://ghcr.io/trueforge-org/renovate)
([source](https://redirect.github.com/renovate/renovate)) | minor |
`a478ba3` → `01fa77f` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3Jlbm92YXRlIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9taW5vciJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/cloudreve/cloudreve | patch | `40f427e` → `bfe2a29` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2Nsb3VkcmV2ZSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/medusa](https://redirect.github.com/linuxserver/docker-medusa/packages)
([source](https://redirect.github.com/linuxserver/docker-medusa)) |
digest | `478ab30` → `07538c8` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL21lZHVzYSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/alpine/socat | digest | `35aa182` → `accce73` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2plbGx5ZmluIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/plex](https://ghcr.io/trueforge-org/plex)
([source](https://redirect.github.com/plexinc/pms-docker)) | digest |
`332ce65` → `3e5527c` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3BsZXgiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| adminer | digest | `d9498e3` → `2fb88b9` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2FkbWluZXIiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[docker.io/semaphoreui/semaphore](https://redirect.github.com/semaphoreui/semaphore)
| patch | `c213bd7` → `227f54f` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Release Notes
<details>
<summary>semaphoreui/semaphore
(docker.io/semaphoreui/semaphore)</summary>
###
[`v2.17.2`](https://redirect.github.com/semaphoreui/semaphore/compare/v2.17.0...v2.17.2)
[Compare
Source](https://redirect.github.com/semaphoreui/semaphore/compare/v2.17.0...v2.17.2)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3NlbWFwaG9yZSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/renovate](https://ghcr.io/trueforge-org/renovate)
([source](https://redirect.github.com/renovate/renovate)) | patch |
`ba922b8` → `a478ba3` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3Jlbm92YXRlIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9wYXRjaCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| ghcr.io/agregarr/agregarr | minor | `87ea4f0` → `5f638ef` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2FncmVnYXJyIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9taW5vciJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/iyuucn/iyuuplus | digest | `6b951ba` → `89c1204` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2l5dXVwbHVzIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/sonatype/nexus3 | digest | `0323d6f` → `1aa9031` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL25leHVzLW9zcyIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| lscr.io/linuxserver/blender | digest | `a17d07d` → `247c892` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2JsZW5kZXIiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| ghcr.io/linuxserver/doublecommander | digest | `f3e16ca` → `926e3df` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2RvdWJsZWNvbW1hbmRlciIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[oci.trueforge.org/containerforge/valkey-tools](https://ghcr.io/trueforge-org/valkey-tools)
([source](https://truecharts.org)) | digest | `ff58ea5` → `0a3c02a` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL2NvbW1vbiIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvZGlnZXN0Il19-->
Signed-off-by: Alfred Göppel <43101280+alfi0812@users.noreply.github.com>
Co-authored-by: Alfred Göppel <43101280+alfi0812@users.noreply.github.com>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/taxel/plextraktsync](https://redirect.github.com/Taxel/PlexTraktSync)
| minor | `9a19438` → `7a0c03e` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the Dependency
Dashboard for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Release Notes
<details>
<summary>Taxel/PlexTraktSync (ghcr.io/taxel/plextraktsync)</summary>
###
[`v0.34.22`](https://redirect.github.com/Taxel/PlexTraktSync/compare/0.34.21...0.34.22)
[Compare
Source](https://redirect.github.com/Taxel/PlexTraktSync/compare/0.34.21...0.34.22)
</details>
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My44LjUiLCJ1cGRhdGVkSW5WZXIiOiI0My44LjUiLCJ0YXJnZXRCcmFuY2giOiJtYXN0ZXIiLCJsYWJlbHMiOlsiYXBwL3BsZXh0cmFrdHN5bmMiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL21pbm9yIl19-->
Signed-off-by: Alfred Göppel <43101280+alfi0812@users.noreply.github.com>
Co-authored-by: Alfred Göppel <43101280+alfi0812@users.noreply.github.com>
TrueCharts Bot