This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[docker.io/clamav/clamav](https://redirect.github.com/Cisco-Talos/clamav.git)
([source](https://redirect.github.com/Cisco-Talos/clamav)) | digest |
`bb355a4` → `7dbf7f9` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvbmV4dGNsb3VkIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| ghcr.io/atuinsh/atuin | patch | `9a3bf22` → `5102696` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvYXR1aW4iLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL3BhdGNoIl19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| ghcr.io/lissy93/dashy | digest | `d57b1fa` → `f656ea5` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvZGFzaHkiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/benbusby/whoogle-search | patch | `d5bff67` → `fe59180` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvd2hvb2dsZSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/orcaslicer](https://redirect.github.com/linuxserver/docker-orcaslicer/packages)
([source](https://redirect.github.com/linuxserver/docker-orcaslicer)) |
patch | `4e36105` → `b001363` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvb3JjYXNsaWNlciIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[docker.io/zwavejs/zwave-js-ui](https://redirect.github.com/zwave-js/zwave-js-ui)
| patch | `9ed974f` → `8717025` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Release Notes
<details>
<summary>zwave-js/zwave-js-ui (docker.io/zwavejs/zwave-js-ui)</summary>
###
[`v11.15.1`](https://redirect.github.com/zwave-js/zwave-js-ui/blob/HEAD/CHANGELOG.md#11151-2026-03-23)
[Compare
Source](https://redirect.github.com/zwave-js/zwave-js-ui/compare/v11.15.0...v11.15.1)
##### ✨ Features
- bump zwave-js\@​15.22.1
([#​4598](https://redirect.github.com/zwave-js/zwave-js-ui/issues/4598))
([aa88ac7](https://redirect.github.com/zwave-js/zwave-js-ui/commit/aa88ac73aba73b2d7c49ddafccd1b777262f8c8a))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvendhdmVqczJtcXR0IiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9wYXRjaCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/docuseal/docuseal | patch | `8ef0792` → `7493fd7` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvZG9jdXNlYWwiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL3BhdGNoIl19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| ghcr.io/linuxserver/tvheadend | digest | `3c1bec8` → `9d51223` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvdHZoZWFkZW5kIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/flowiseai/flowise | patch | `d4da3ff` → `1c99d1f` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvZmxvd2lzZSIsImF1dG9tZXJnZSIsInJlbm92YXRlL2NvbnRhaW5lciIsInR5cGUvcGF0Y2giXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/mysql-workbench](https://redirect.github.com/linuxserver/docker-mysql-workbench/packages)
([source](https://redirect.github.com/linuxserver/docker-mysql-workbench))
| digest | `59eca9f` → `3f11503` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvbXlzcWwtd29ya2JlbmNoIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/connorgallopo/tracearr](https://redirect.github.com/connorgallopo/Tracearr)
| patch | `3093664` → `39cd3f0` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Release Notes
<details>
<summary>connorgallopo/Tracearr
(ghcr.io/connorgallopo/tracearr)</summary>
###
[`v1.4.24`](https://redirect.github.com/connorgallopo/Tracearr/releases/tag/v1.4.24)
[Compare
Source](https://redirect.github.com/connorgallopo/Tracearr/compare/v1.4.23...v1.4.24)
Create and restore database backups from Settings. Manual or scheduled
(daily/weekly/monthly) with retention policies. Restore handles the full
process — stops services, restores the DB, clears Redis, runs pending
migrations, and restarts. Rolls back if anything fails.
- **Version checks** — Won't let you restore a backup from a newer
PostgreSQL or TimescaleDB version than what you're running.
- **Backup volume** — Docker compose files now support mounts at
`/data/backup` for the backup path.
- **Docs** — <https://docs.tracearr.com/configuration/backup>
Session detail sheet shows pause/resume cycles when a session has more
than one segment. Each one lists start, stop, duration, and pause time.
Added PostgreSQL, TimescaleDB, and Redis versions. Docker deployments
show container memory/CPU, volume free space, and system load. Log
download button zips up all supervisor logs (supervised only).
Added `artistName`, `albumName`, `trackNumber`, and `discNumber` to the
MediaInfo schema for music tracks.
Plex libraries force a full scan every 7 sync cycles. Incremental syncs
that return more than 30% of total items fall back to a full scan.
Incomplete syncs (shows with no episodes, artists with no tracks) no
longer save state — next cycle retries.
Time-series charts moved from category axes to datetime axes with shared
date parsing.
- Redis in supervised mode runs with append-only persistence.
- Entrypoint skips recursive `chown` when ownership is already correct —
helps on large volumes.
- Removed old PG16 compose file.
- **Stream cache
([#​607](https://redirect.github.com/connorgallopo/Tracearr/issues/607))**
— Sessions dropping out of the Redis active set on TTL expiry,
disappearing from the dashboard until the next poll.
- **History page** — Slow loads on large datasets. Disabled PostgreSQL
JIT for these queries.
- **Inactivity rules** — Comparison operators (gt, lt, eq, etc.) were
ignored. Any inactive user matched regardless of threshold.
- **Watch time** — Still calculating elapsed time on stopped sessions.
- **User join dates
([#​620](https://redirect.github.com/connorgallopo/Tracearr/issues/620))**
— Showing global account creation instead of per-server join date.
- **Plex full scan
([#​619](https://redirect.github.com/connorgallopo/Tracearr/issues/619))**
— No periodic safety net for incremental-only syncs.
- **Error logging
([#​625](https://redirect.github.com/connorgallopo/Tracearr/issues/625))**
— Stack traces not serializing in logs. Switched to Pino's `err` key.
As always - thank you for the support and feedback!
</details>
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvdHJhY2VhcnIiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL3BhdGNoIl19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/freshrss](https://redirect.github.com/linuxserver/docker-freshrss/packages)
([source](https://redirect.github.com/linuxserver/docker-freshrss)) |
digest | `e245447` → `4e513b8` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvZnJlc2hyc3MiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[docker.io/haveagitgat/tdarr](https://redirect.github.com/HaveAGitGat/tdarr_express_be)
| minor | `53e524d` → `94bc18b` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvdGRhcnIiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL21pbm9yIl19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/healthchecks](https://redirect.github.com/linuxserver/docker-healthchecks/packages)
([source](https://redirect.github.com/linuxserver/docker-healthchecks))
| patch | `cd9dc54` → `9284fb7` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvaGVhbHRoY2hlY2tzIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9wYXRjaCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/diygod/rsshub | digest | `94896d8` → `d9aaa61` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvcnNzaHViIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/machines/filestash | digest | `8daa862` → `8d6bc81` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvZmlsZXN0YXNoIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9kaWdlc3QiXX0=-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/jlesage/handbrake](https://redirect.github.com/jlesage/docker-handbrake)
| patch | `9ec1967` → `2b1eb1e` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Release Notes
<details>
<summary>jlesage/docker-handbrake (ghcr.io/jlesage/handbrake)</summary>
###
[`v26.03.3`](https://redirect.github.com/jlesage/docker-handbrake/releases/tag/v26.03.3):
Version 26.03.3
[Compare
Source](https://redirect.github.com/jlesage/docker-handbrake/compare/v26.03.2...v26.03.3)
Changes in this release:
- Updated HandBrake to version 1.11.1.
</details>
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvaGFuZGJyYWtlIiwiYXV0b21lcmdlIiwicmVub3ZhdGUvY29udGFpbmVyIiwidHlwZS9wYXRjaCJdfQ==-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| docker.io/sirfragalot/hyperion.ng | minor | `75df269` → `1848762` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvaHlwZXJpb24tbmciLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL21pbm9yIl19-->
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
|
[ghcr.io/linuxserver/grocy](https://redirect.github.com/linuxserver/docker-grocy/packages)
([source](https://redirect.github.com/linuxserver/docker-grocy)) |
digest | `72cadb3` → `6b507d1` |
---
> [!WARNING]
> Some dependencies could not be looked up. Check the [Dependency
Dashboard](../issues/18710) for more information.
Add the preset `:preserveSemverRanges` to your config if you don't want
to pin your dependencies.
---
### Configuration
📅 **Schedule**: Branch creation - At any time (no schedule defined),
Automerge - At any time (no schedule defined).
🚦 **Automerge**: Enabled.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
This PR has been generated by [Renovate
Bot](https://redirect.github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4yOS4yIiwidXBkYXRlZEluVmVyIjoiNDMuMjkuMiIsInRhcmdldEJyYW5jaCI6Im1hc3RlciIsImxhYmVscyI6WyJhcHAvZ3JvY3kiLCJhdXRvbWVyZ2UiLCJyZW5vdmF0ZS9jb250YWluZXIiLCJ0eXBlL2RpZ2VzdCJdfQ==-->
**Description**
Authentik removed is requirement for redis in 2025.10
See: https://goauthentik.io/blog/2025-11-13-we-removed-redis/⚒️ Fixes # <!--(issue)-->
**⚙️ Type of change**
- [ ] ⚙️ Feature/App addition
- [x] 🪛 Bugfix
- [ ] ⚠️ Breaking change (fix or feature that would cause existing
functionality to not work as expected)
- [ ] 🔃 Refactor of current code
- [ ] 📜 Documentation Changes
**🧪 How Has This Been Tested?**
<!--
Please describe the tests that you ran to verify your changes. Provide
instructions so we can reproduce. Please also list any relevant details
for your test configuration
-->
Tested chart renders
**📃 Notes:**
<!-- Please enter any other relevant information here -->
**✔️ Checklist:**
- [x] ⚖️ My code follows the style guidelines of this project
- [X] 👀 I have performed a self-review of my own code
- [ ] #️⃣ I have commented my code, particularly in hard-to-understand
areas
- [ ] 📄 I have made changes to the documentation
- [ ] 🧪 I have added tests to this description that prove my fix is
effective or that my feature works
- [x] ⬆️ I increased versions for any altered app according to semantic
versioning
- [x] I made sure the title starts with `feat(chart-name):`,
`fix(chart-name):`, `chore(chart-name):`, `docs(chart-name):` or
`fix(docs):`
**➕ App addition**
If this PR is an app addition please make sure you have done the
following.
- [ ] 🖼️ I have added an icon in the Chart's root directory called
`icon.png`
---
_Please don't blindly check all the boxes. Read them and only check
those that apply.
Those checkboxes are there for the reviewer to see what is this all
about and
the status of this PR with a quick glance._
TrueCharts Bot