The game now opens on a main menu when it has a window: practice
against bots (count and skill), join a server (by address, or from a
LAN search list), settings, and quit. In a match, Escape brings up a
pause menu (the match goes on) with settings and leave; when a match
the player was in ends, a results screen shows their place,
eliminations and the last of the feed.
- KeyBindings: every action rebindable to a key or mouse button.
bind() refuses an input another action uses and names it; Escape is
reserved. ClientInput reads keys through the bindings.
- GameSettings: bindings, mouse, graphics (quality preset and the
print pass), audio (master, music and effects buses), display
(window mode, vsync, frame cap), name, last server and practice
choices, saved in user://settings.cfg. Missing, unreadable or
corrupt files and bad values fall back to defaults, value by value;
hand-edited key clashes are repaired on load.
- Menus (src/ui): paper-and-ink panels, brass focus edge, keyboard
navigable; a drawn sea-and-tide-post backdrop, or an ink wash over
a match. AppShell runs menus and the session.
- LocalServer takes a bot difficulty.
- make menu-captures renders every screen.
Closes#50
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HUD (src/client/hud) is drawn in the paper-and-ink motifs of the style
guide:
- top centre: the tide post, the most prominent thing on screen. It is a
notched post with the sea filled in, the next level's rust notch and the
player's own height. Beside it are the phase, the time to the rise, both
levels and how far the player stands above or below the next line;
- top right: how many are standing, and the kill feed in words;
- bottom left: health and armour, each with a number, a word, quarter notches
and its own hatching. Low health adds LOW;
- bottom centre: the boathook and five slots, with names on two lines, rounds
and reserve or counts, and tier pips;
- bottom right: materials, and the build line ("NOT ENOUGH" when short).
Snapshots only carry nearby players, so the server now sends FEED (NetFeed,
reliable) when anyone is placed and at each phase change. It carries who is
standing, the match size and the newest 16 entries with names. Bots get crew
names (CrewNames). HudState works out what to show from the client, or from a
server's match for captures and tests, so the drawing never reaches into
either.
The project now stretches canvas items from a 1280x720 base, so the HUD scales
to any screen. make hud-captures renders it at 1280x720 and 3840x2160. The
parser fuzzer covers FEED.
Closes#49
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/STYLE.md sets Tidewall's look: a drowned coast printed by hand. It has the
palette, shape language, character proportions, shading, UI motifs, audio
palette and a do-not-do list.
- Palette (src/client/style/palette.gd) is the one table of client colours.
Every colour that was scattered over the views now names its entry, with
values unchanged. test_palette fails on a colour literal anywhere else in
src/client or src/app, and on a palette colour the guide doesn't list.
- Look sets up the sky, the salt-faded grading (saturation 0.86, contrast
1.05), the sun and the print pass, for the match view and the capture scenes.
- folk_print.gdshader is one full-screen quad multiplied over the frame. It
draws ink lines at depth jumps and creases (fading with distance, scaled with
screen height), diagonal hatching cut into real shadow, and faint paper
grain. Ground under the sea gets none.
- make style-captures renders a hamlet and a dock with and without the pass.
Closes#41
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Build ghost: ClientSession shows a BuildGhost in build mode while the
client plays, asking Building.check() of its own world and predicted
player with the mouse's newest look, so it agrees with the server.
- Flooded basins: ClientMirror.follow_flood() spreads the client's flood
as the server's tide tick does, from the tide and the pieces it has.
WaterView passes a mask of flooded cells (Flood.pours says when it
changed) to the sea shader, which leaves dry cells undrawn.
- Shots, impacts and swings: a new FX message (NetFx) goes unreliably on
the state channel next to each snapshot, with what happened within
NET_FX_RADIUS_METRES of what the client watches or involving that
player. ClientGame keeps them in `fx` for views and sound. They change
no state, so a lost one is a missed flash; sending them reliably would
add to the traffic a bad link can least afford (N8). The fuzzer covers
the new parser.
- Captures: client_build and client_build_refused show the ghost in its
allowed and refused tints; client_basin rings shore ground with
breakwaters and plays until the tide stands over it, and the server,
the client's flood and the drawn sea all keep the basin dry.
- Tests: NetFx round trips, limits and malformed input; a landed player's
shots and impacts reach a client, each matching a server event; the
client keeps a ringed basin dry through the first rise, floods it with
no ring, catches up after a long frame; the water mask follows pours.
The held item is still not drawn; that needs the models (A4, #44).
Closes#78
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The soak's drops under loss came from stalls: the server's island (#79) and
each client process making islands on its main thread fed ENet second-long
round-trip samples, its retransmission timer grew, and two losses of one
reliable message in the busy drop that followed reached the 15 s timeout.
- ClientGame.build_in_background makes a new match's island on a
WorkerThreadPool task and holds the packets that arrive meanwhile, then
takes them in order. The networked client and the soak's clients use it;
the soak's own one-island-a-frame holding is gone.
- NetServer.close(grace_msec) sends the shutdown notice reliably and
services the socket while clients acknowledge it. The headless server
waits up to 2 s. A notice sent once was lost under 2% loss, and that
client timed out instead of hearing the server stop.
- Tests: background island holding and ordering, freeing mid-build, a
graceful shutdown reaching four clients behind 50% loss (it fails with
the old one-shot notice), and the scripted UDP match and client capture
wait for the client's island the way a real 20 s lobby would.
The soak at 2% loss and +/-20 ms now keeps all 24 clients for both matches,
with 0 of 3,758 world hashes differing and every client told of the stop.
It still fails on client memory growth between matches in two of three
processes (17 and 20 MB), which is not yet explained, so #39 stays open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The client program now turns a connection into a match someone can play.
- ClientSession: a ClientGame, the keyboard and mouse as commands
(ClientInput), and a MatchView of the client's own copy of the world.
- ClientMirror writes what the client is showing into that world every
frame: other players from the recent past, its own player where it was
predicted, items, the barge, the clock and the sea. The existing views
draw it unchanged.
- LocalServer: offline play is the same ServerLoop and NetGame in the same
process, with packets handed across in memory, so there is one path.
- main.gd: --connect=HOST[:PORT] joins a server, otherwise an offline
match; --autoplay and --client-seconds=N for scripts and checks.
- The camera aboard the barge follows the player's own place on the deck.
Tests drive a scripted client through a whole match on a real server over
loopback UDP, lobby to results, and through an offline match. `make
client-check` does it with two real processes, and `make client-captures`
renders what the client sees.
Closes#77
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`make match` plays one whole match from the lobby to the results and back to the
lobby: one scripted player and 23 bots on a local server, with no script errors.
- CommandLog records the seed, the rules and every command the server is given.
MatchReplay plays a log again with nobody thinking and ends on the same state
hash; `make match` saves the log, reads it back and checks that.
- ServerLoop.submit() is now the one way commands reach the simulation, so a
recording server sees them all.
- ScriptedPlayer plays a human seat: it drops, loots, fights and flees as a bot
does, and also cuts driftwood and builds a breakwater and a wall.
- Bots draw randomness from their own per-bot generators, not the simulation's
streams. A bot thinking no longer changes the simulation's state, which a
replay without bots needs.
- MatchView and EntityView draw a match from one Simulation: terrain, sea,
points of interest, props, pieces, players, the barge, items and chests, with
stand-in shapes for the art pass to replace.
- `make match-captures` renders eight stages of the recorded match.
Closes#31
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Server-authoritative grid building with wall, floor, ramp, roof and
breakwater pieces in driftwood, stone and salvage iron, plus a client
placement ghost.
- StructureSet: pieces in grid slots (floor, two wall edges, cell
volume), their collision boxes in SimGround, and touching-neighbour
links kept up to date for B3. Ramps are stairs of 0.4 m steps; walls
over lower ground get a skirt down to the terrain; roofs are a low
stepped pyramid. Pieces are part of the state hash.
- Building: target() snaps look and position to a slot, and check()
validates any slot as if a hostile client chose it: state, range,
occupancy, trapping a player, cost and support. Fire in build mode
places at most 10 pieces a second; players in a low step are lifted.
- Levels are half a cell (2 m) apart, so ground pieces sit within a
metre of the builder's feet instead of being half buried.
- Client: StructureView draws pieces from their boxes in plank, course
or panel strips; ramps draw as a sloped deck. BuildGhost shows sea
green or rust red from the same target() and check().
- Tests: 15 sim tests (targeting, every rejection, overlap, support,
stairs climbable, skirts, determinism, 24 builders at 10 pieces a
second within the tick budget) and 5 client tests (ghost states,
ghost agrees with the server, view sync, mesh orientation).
- Capture scenarios build_fort and build_fort_side.
Closes#16
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The simulation has a global sea level (Simulation.sea_level, changed with
set_sea_level and read every tick, so the tide can move it mid-match).
Walkers wade more slowly in water over WADE_DEPTH; in water SWIM_DEPTH deep
they swim: floating head-out, sprint-swimming, diving with crouch, kicking
out with jump, and standing again in the shallows. Falling into deep water
does no fall damage. Water tracks breath, stamina and drowning in whole
ticks: swimming spends stamina, an exhausted swimmer slips under, and with
no breath left the tide phase's drown damage lands once a second. All of
it, plus the sea level, is in the state hash.
WaterView draws the sea surface at the simulation's level with a
procedural shader: depth-tinted colour, foam at the waterline, ripples.
Closes#13
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PropSet places about 3,000 pines, scrub, boulders, wrecks and crates per
island from the seed, by elevation band with grove noise, clear of points
of interest. Each prop is one collision box in SimGround with health from
Tuning.PROP_KINDS; destroying it removes the box at once
(SimGround.remove_solid). Prop health is part of the state hash.
PropView draws them as one MultiMesh per kind per 128 m square (about 150
instanced draws), with per-kind visibility ranges, procedural flat-shaded
meshes fitted to the collision boxes, and cheap sync of felled props.
Closes#12
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PoiSet.generate(island) places 10 to 16 points of interest per island from
the seed's "poi" stream: hilltop shrines, lighthouses, docks, salt works,
quarries and fishing hamlets, at least 85 m apart. Each kind has a siting
rule (height band, flatness, coast or summit) that loosens step by step
until its minimum is placed. Piers are sited so their deck clears the
ground all the way out to water 1.5 m deep.
Poi assembles each from modular parts in a local frame turned in quarter
turns, so every solid stays an axis-aligned box: walls with a door and
lintel, plinths, steps down to the ground, roofs, a stair to a loft. Each
POI carries loot spawn markers, exposed through PoiSet.loot_markers(),
and walking routes from open ground into its interiors.
- Simulation adds every POI solid to its ground and never spawns players
inside one.
- SimGround indexes solids in 8 m cells, so collision queries only test
nearby boxes. Smoke p95 tick is 0.47 ms with about 300 solids.
- Movement tests the body where it will stand after stepping up, so
stairs with treads narrower than the body can be climbed. The
traversal test found the lighthouse stair impassable without it.
- PoiView draws parts as one MultiMesh per look, in the seafaring
palette. Capture scenarios poi_<kind> frame each kind.
- Summit stone is darker so it no longer reads as snow.
Tests: 30 seeds get every kind within its limits, 10 to 16 in total,
spaced and sited; placement is deterministic; loot markers stand on
floors and are not inside solids; a player walks every route of every
POI on 4 seeds through doors, up steps and the lighthouse stair; stairs
with 0.45 m treads are climbed and a step doesn't carry the body into a
wall; the solid index matches a full scan on 500 queries.
Closes#11
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TerrainView draws the island as 16 x 16 chunks of 64 m, each at one of
four detail levels (2, 4, 8 and 16 m spacing) chosen by distance to the
camera. TerrainChunkBuilder builds chunk geometry on WorkerThreadPool
threads; the main thread only uploads finished meshes, within a 2 ms
per-frame budget, nearest chunks first.
- Seams: every chunk hangs skirts deeper than twice the most any level
strays from the full-resolution edge, so neighbours at any two levels
meet without a crack. Normals come from the full-resolution heightfield
at every level, and back faces light like the ground above them.
- Splat material: a procedural shader blends sand, marsh, grass and rock
with weights from the island's bands, averaged over 4 m so borders
blend. Steep ground turns to rock and summits weather pale.
- Collision stays SimGround's heightfield, with no renderer involved.
- Capture scenarios terrain, terrain_lod (tinted by level) and
terrain_cracks (magenta sky). tools/crack_check.gd counts sky pixels
seen through the ground; make terrain-capture requires cracks in a
skirtless control and none in the real terrain.
Tests: chunk vertices sit on the heightfield; skirts cover every pairing
of levels on sampled shared edges; detail falls with distance; flying
across the island at 30 m/s for 2,037 frames streams 661 chunk rebuilds
with the worst main-thread frame at 0.8 to 1.4 ms (headless, CPU only);
24 players over 900 ticks on two generated islands never sink into the
ground, and a player sprints up towards a summit unharmed.
make terrain-capture: control 437 crack pixels, terrain 0.
Closes#10
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Simulation (src/sim/):
- SimGround holds the terrain heightfield (bilinear heights, normals)
and axis-aligned box solids, with support, body-overlap, point and
ray queries. The island generator and building will fill it.
- Movement steps a player per tick: walk, sprint (forward only),
crouch (lower body, slower, no jump), jump with exact constant-gravity
integration, air control, step-up onto ledges up to STEP_HEIGHT,
ground snapping on downhill walks, slopes over MAX_SLOPE_DEGREES that
block walking and jumping uphill and make players slide (speed capped),
ceiling bumps, sliding along walls, and fall damage from impact speed.
- Gravity now applies on ticks with no command. on_ground and crouching
are part of the state hash. New movement numbers are in Tuning.
- Fixed the strafe direction: right is forward x up in Godot's frame,
(-cos yaw, 0, sin yaw). Documented the look convention.
Client (src/client/):
- CameraRig places an over-the-shoulder camera with an eased
aim-down-sights blend (closer, narrower FOV), casting against the same
SimGround: pivot to shoulder, shoulder back, then a straight line from
the pivot, with a final clearance pull-in so the near plane never
enters geometry.
- InputSettings: mouse sensitivity, aim sensitivity scale and invert-Y,
clamped and saved to user://settings.cfg. PlayerCamera applies both.
Tests: 46 new across movement, ground queries, camera and settings,
including a 24,480-view scripted camera sweep through five arenas (wall,
corridor, low roof, corner, steep bank) that checks the eye and every
near-plane corner stay out of geometry with a clear line to the pivot.
The hash test now flips a high stick bit, because a 1/127 nudge to an
airborne player moves them less than the hash's millimetre.
Capture scenarios camera, camera_wall and camera_aim.
Closes#8
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tools/capture.sh <scene-or-scenario> <out.png> renders the real client
in a throwaway tidewall-capture-* Docker container (debian:13, Xvfb,
Mesa software rendering), with no network, no host display, GPU or
audio, and removes the container afterwards. The tidewall-capture image
rebuilds only when its recipe changes.
Forward+ through Lavapipe is the default, matching the game;
CAPTURE_RENDERER=compatibility uses OpenGL through llvmpipe. The script
fails if Godot silently falls back to another renderer, and fails on a
blank frame, judged by ImageStats (luminance variance and colour count).
make capture-test renders the shore test scene with both renderers and
proves an empty scene is rejected. ImageStats has unit tests in
make check. CLAUDE.md now requires a capture for visual issues, and
requires that it be opened and looked at.
Closes#7
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>