B2: Grid building and placement preview
Server-authoritative grid building with wall, floor, ramp, roof and breakwater pieces in driftwood, stone and salvage iron, plus a client placement ghost. - StructureSet: pieces in grid slots (floor, two wall edges, cell volume), their collision boxes in SimGround, and touching-neighbour links kept up to date for B3. Ramps are stairs of 0.4 m steps; walls over lower ground get a skirt down to the terrain; roofs are a low stepped pyramid. Pieces are part of the state hash. - Building: target() snaps look and position to a slot, and check() validates any slot as if a hostile client chose it: state, range, occupancy, trapping a player, cost and support. Fire in build mode places at most 10 pieces a second; players in a low step are lifted. - Levels are half a cell (2 m) apart, so ground pieces sit within a metre of the builder's feet instead of being half buried. - Client: StructureView draws pieces from their boxes in plank, course or panel strips; ramps draw as a sloped deck. BuildGhost shows sea green or rust red from the same target() and check(). - Tests: 15 sim tests (targeting, every rejection, overlap, support, stairs climbable, skirts, determinism, 24 builders at 10 pieces a second within the tick budget) and 5 client tests (ghost states, ghost agrees with the server, view sync, mesh orientation). - Capture scenarios build_fort and build_fort_side. Closes #16 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
@@ -0,0 +1,193 @@
|
||||
## Server-authoritative placement. In build mode (BUTTON_BUILD held) a command's
|
||||
## `selection` is the piece kind and `material` the material code, and fire places.
|
||||
## The server works out the slot from its own copy of the player's position and look,
|
||||
## with target(), the same function the client's ghost uses. check() then validates the
|
||||
## slot as if a hostile client had chosen it.
|
||||
##
|
||||
## Targeting: the look direction is snapped to a quarter turn. Walls and breakwaters go
|
||||
## on the edge of the builder's own cell in that direction. Floors, ramps and roofs go
|
||||
## in the next cell that way, or in the builder's own cell when looking well down. Ramps
|
||||
## rise away from the builder. The level is the one nearest the feet, plus a whole cell
|
||||
## (two levels) when looking well up.
|
||||
class_name Building
|
||||
extends RefCounted
|
||||
|
||||
enum Result {
|
||||
OK,
|
||||
## Dead, swimming, aboard the barge or falling.
|
||||
NOT_ALLOWED,
|
||||
## Unknown piece kind or material.
|
||||
BAD_REQUEST,
|
||||
OUT_OF_WORLD,
|
||||
OUT_OF_RANGE,
|
||||
OCCUPIED,
|
||||
## Would trap a player inside it.
|
||||
BLOCKED_BY_PLAYER,
|
||||
UNAFFORDABLE,
|
||||
## Touches neither the terrain nor another piece.
|
||||
UNSUPPORTED,
|
||||
}
|
||||
|
||||
|
||||
## Where a piece would go.
|
||||
class Target:
|
||||
extends RefCounted
|
||||
var kind: int = 0
|
||||
var slot: Vector4i = Vector4i.ZERO
|
||||
var facing: int = 0
|
||||
|
||||
|
||||
static func is_allowed(player: SimEntity) -> bool:
|
||||
return player.health > 0 and player.drop_state == Drop.NONE and not player.swimming
|
||||
|
||||
|
||||
## Quarter-turn facing (0 +z, 1 +x, 2 -z, 3 -x) nearest the player's yaw.
|
||||
static func facing_of(player: SimEntity) -> int:
|
||||
return posmod(roundi(float(player.yaw) / PlayerCommand.YAW_STEPS * 4.0), 4)
|
||||
|
||||
|
||||
## The slot a piece of `kind` would go in from the player's current pose, or null for
|
||||
## an unknown kind.
|
||||
static func target(player: SimEntity, kind: int) -> Target:
|
||||
if kind < 0 or kind >= StructureSet.KINDS.size():
|
||||
return null
|
||||
var g: float = StructureSet.cell_size()
|
||||
var facing: int = facing_of(player)
|
||||
var direction: Vector2i = StructureSet.FACING_DIRECTIONS[facing]
|
||||
var pitch_degrees: float = float(player.pitch) / PlayerCommand.PITCH_MAX * 90.0
|
||||
var feet: Vector3 = player.position
|
||||
var cell: Vector2i = Vector2i(floori(feet.x / g), floori(feet.z / g))
|
||||
var level: int = roundi(feet.y / Tuning.BUILD_LEVEL_METRES)
|
||||
if pitch_degrees > Tuning.BUILD_LOOK_UP_DEGREES:
|
||||
level += roundi(g / Tuning.BUILD_LEVEL_METRES)
|
||||
var result: Target = Target.new()
|
||||
result.kind = kind
|
||||
result.facing = facing
|
||||
if StructureSet.is_wall_kind(kind):
|
||||
match facing:
|
||||
0:
|
||||
result.slot = Vector4i(cell.x, level, cell.y + 1, StructureSet.SLOT_WALL_Z)
|
||||
1:
|
||||
result.slot = Vector4i(cell.x + 1, level, cell.y, StructureSet.SLOT_WALL_X)
|
||||
2:
|
||||
result.slot = Vector4i(cell.x, level, cell.y, StructureSet.SLOT_WALL_Z)
|
||||
_:
|
||||
result.slot = Vector4i(cell.x, level, cell.y, StructureSet.SLOT_WALL_X)
|
||||
# A wall's facing only records which side the builder stood on.
|
||||
return result
|
||||
var looking_down: bool = pitch_degrees < -Tuning.BUILD_LOOK_DOWN_DEGREES
|
||||
if not looking_down:
|
||||
cell += direction
|
||||
result.slot = Vector4i(cell.x, level, cell.y, StructureSet.slot_type_of(kind))
|
||||
return result
|
||||
|
||||
|
||||
## The boxes the piece would have, skirt included, as placed in `ground`.
|
||||
static func boxes_for_target(at: Target, ground: SimGround) -> Array[AABB]:
|
||||
var boxes: Array[AABB] = StructureSet.boxes_for(at.kind, at.slot, at.facing)
|
||||
if StructureSet.is_wall_kind(at.kind):
|
||||
var skirt: AABB = StructureSet.skirt_for(at.kind, boxes[0], ground)
|
||||
if skirt.size != Vector3.ZERO:
|
||||
boxes.append(skirt)
|
||||
return boxes
|
||||
|
||||
|
||||
## Whether `player` may place a piece of `at.kind` in `material` at `at`. Checks
|
||||
## everything, as if a hostile client had picked the slot.
|
||||
static func check(sim: Simulation, player: SimEntity, at: Target, material: int) -> Result:
|
||||
if not is_allowed(player):
|
||||
return Result.NOT_ALLOWED
|
||||
if at == null or at.kind < 0 or at.kind >= StructureSet.KINDS.size() or not Materials.is_valid(material):
|
||||
return Result.BAD_REQUEST
|
||||
if at.facing < 0 or at.facing > 3 or at.slot.w != _expected_slot_type(at):
|
||||
return Result.BAD_REQUEST
|
||||
var boxes: Array[AABB] = boxes_for_target(at, sim.ground)
|
||||
if not _inside_world(at, boxes[0]):
|
||||
return Result.OUT_OF_WORLD
|
||||
var centre: Vector3 = boxes[0].get_center()
|
||||
if at.kind == StructureSet.RAMP:
|
||||
var whole: AABB = boxes[0]
|
||||
for box: AABB in boxes:
|
||||
whole = whole.merge(box)
|
||||
centre = whole.get_center()
|
||||
if Harvest.eye(player).distance_to(centre) > Tuning.BUILD_RANGE:
|
||||
return Result.OUT_OF_RANGE
|
||||
if sim.structures.occupied(at.slot):
|
||||
return Result.OCCUPIED
|
||||
if _traps_a_player(sim, boxes):
|
||||
return Result.BLOCKED_BY_PLAYER
|
||||
if player.materials[material] < StructureSet.cost_of(at.kind):
|
||||
return Result.UNAFFORDABLE
|
||||
if not StructureSet.touches_terrain(boxes, sim.ground) and sim.structures.touching(boxes, sim.ground).is_empty():
|
||||
return Result.UNSUPPORTED
|
||||
return Result.OK
|
||||
|
||||
|
||||
## Validates and places. Returns the result; on OK the piece is in `sim.structures`, its
|
||||
## cost is spent, players standing in a low step of it are lifted onto it, and a
|
||||
## "piece_placed" event is recorded.
|
||||
static func place(sim: Simulation, player: SimEntity, at: Target, material: int) -> Result:
|
||||
var result: Result = check(sim, player, at, material)
|
||||
if result != Result.OK:
|
||||
return result
|
||||
Materials.spend(player, material, StructureSet.cost_of(at.kind))
|
||||
var piece: StructureSet.Piece = sim.structures.add(at.kind, material, at.slot, at.facing, player.id, sim.tick, sim.ground)
|
||||
_lift_players(sim, piece.boxes)
|
||||
sim.events.append({"type": "piece_placed", "player": player.id, "piece": piece.id, "kind": at.kind, "material": material})
|
||||
return result
|
||||
|
||||
|
||||
## A tick of build mode: fire places at the target if the cooldown allows.
|
||||
static func act(sim: Simulation, player: SimEntity, command: PlayerCommand) -> void:
|
||||
if player.action_cooldown > 0 or not command.is_pressed(PlayerCommand.BUTTON_FIRE):
|
||||
return
|
||||
var at: Target = target(player, command.selection)
|
||||
if place(sim, player, at, command.material) == Result.OK:
|
||||
player.action_cooldown = Tuning.BUILD_INTERVAL_TICKS
|
||||
|
||||
|
||||
static func _expected_slot_type(at: Target) -> int:
|
||||
if StructureSet.is_wall_kind(at.kind):
|
||||
return at.slot.w if at.slot.w == StructureSet.SLOT_WALL_X or at.slot.w == StructureSet.SLOT_WALL_Z else -1
|
||||
return StructureSet.slot_type_of(at.kind)
|
||||
|
||||
|
||||
static func _inside_world(at: Target, box: AABB) -> bool:
|
||||
if at.slot.y < Tuning.BUILD_MIN_LEVEL or at.slot.y > Tuning.BUILD_MAX_LEVEL:
|
||||
return false
|
||||
var size: float = Tuning.WORLD_SIZE_METRES
|
||||
var slack: float = Tuning.BREAKWATER_THICKNESS
|
||||
return box.position.x >= -slack and box.position.z >= -slack and box.end.x <= size + slack and box.end.z <= size + slack
|
||||
|
||||
|
||||
## True if any player's body overlaps the boxes by more than a step.
|
||||
static func _traps_a_player(sim: Simulation, boxes: Array[AABB]) -> bool:
|
||||
for entity: SimEntity in sim.entities.entities():
|
||||
if entity.archetype != SimEntity.ARCHETYPE_PLAYER or entity.health <= 0:
|
||||
continue
|
||||
var feet: Vector3 = entity.position
|
||||
var height: float = Movement.body_height(entity)
|
||||
for box: AABB in boxes:
|
||||
if not _body_overlaps(box, feet, height):
|
||||
continue
|
||||
if box.end.y - feet.y > Tuning.STEP_HEIGHT:
|
||||
return true
|
||||
return false
|
||||
|
||||
|
||||
static func _lift_players(sim: Simulation, boxes: Array[AABB]) -> void:
|
||||
for entity: SimEntity in sim.entities.entities():
|
||||
if entity.archetype != SimEntity.ARCHETYPE_PLAYER:
|
||||
continue
|
||||
var feet: Vector3 = entity.position
|
||||
var height: float = Movement.body_height(entity)
|
||||
for box: AABB in boxes:
|
||||
if _body_overlaps(box, feet, height) and box.end.y > entity.position.y:
|
||||
entity.position.y = box.end.y
|
||||
|
||||
|
||||
static func _body_overlaps(box: AABB, feet: Vector3, height: float) -> bool:
|
||||
var r: float = Tuning.PLAYER_RADIUS
|
||||
if box.end.y <= feet.y or box.position.y >= feet.y + height:
|
||||
return false
|
||||
return feet.x > box.position.x - r and feet.x < box.end.x + r and feet.z > box.position.z - r and feet.z < box.end.z + r
|
||||
@@ -0,0 +1 @@
|
||||
uid://br7ubbpapogdb
|
||||
@@ -28,6 +28,8 @@ var props: PropSet = PropSet.new()
|
||||
var sea_level: float = Tuning.SEA_LEVEL_START
|
||||
## Damage per second to a player underwater with no breath left. Set by the tide phase.
|
||||
var drown_dps: int = Tuning.TIDE_PHASES[0]["drown_dps"]
|
||||
## Every built piece. Their boxes are part of `ground`.
|
||||
var structures: StructureSet = StructureSet.new()
|
||||
## The sky barge, from start_drop() on. Null in matches and tests that start on foot.
|
||||
var drop: Drop = null
|
||||
|
||||
@@ -147,7 +149,10 @@ func _apply_command(player: SimEntity, command: PlayerCommand) -> void:
|
||||
player.action_cooldown -= 1
|
||||
if command == null or not command.is_pressed(PlayerCommand.BUTTON_FIRE):
|
||||
return
|
||||
if not Building.is_allowed(player):
|
||||
return
|
||||
if command.is_pressed(PlayerCommand.BUTTON_BUILD):
|
||||
Building.act(self, player, command)
|
||||
return
|
||||
if command.selection == BOATHOOK_SLOT:
|
||||
Harvest.swing(player, ground, props, events)
|
||||
@@ -202,6 +207,7 @@ func state_hash() -> String:
|
||||
buffer.put_32(drown_dps)
|
||||
buffer.put_64(props.count())
|
||||
buffer.put_data(props.health.to_byte_array())
|
||||
structures.write_state(buffer)
|
||||
|
||||
var hasher: HashingContext = HashingContext.new()
|
||||
hasher.start(HashingContext.HASH_SHA256)
|
||||
|
||||
@@ -0,0 +1,278 @@
|
||||
## Every built piece in a match: walls, floors, ramps, roofs and breakwaters, snapped to
|
||||
## a grid of Tuning.GRID_CELL_METRES cells. Each piece fills one slot, and each slot holds
|
||||
## at most one piece. Pieces are axis-aligned boxes in the SimGround, so movement,
|
||||
## cameras and line of sight treat them like any other solid.
|
||||
##
|
||||
## Slots are Vector4i(x, level, z, type), where a piece's base is `level` times
|
||||
## Tuning.BUILD_LEVEL_METRES (half a cell) above the starting sea:
|
||||
## - FLOOR: the bottom face of cell (x, level, z).
|
||||
## - WALL_X: the face at x = x * GRID between cells x - 1 and x, in row z.
|
||||
## - WALL_Z: the face at z = z * GRID between cells z - 1 and z, in column x.
|
||||
## - VOLUME: the inside of cell (x, level, z), for a ramp or a roof.
|
||||
## Walls and breakwaters share wall slots, so a breakwater can't overlap a wall. A
|
||||
## piece is a whole cell tall, so a slot also counts as taken when the same slot one
|
||||
## level above or below holds a piece.
|
||||
##
|
||||
## Piece IDs count up from 1 and are never reused. Neighbours are pieces whose boxes
|
||||
## touch, kept up to date as pieces come and go, for structural integrity.
|
||||
class_name StructureSet
|
||||
extends RefCounted
|
||||
|
||||
## Piece kind codes index this list. Each name is a key of Tuning.BUILD_PIECES.
|
||||
const KINDS: Array[String] = ["wall", "floor", "ramp", "roof", "breakwater"]
|
||||
const WALL: int = 0
|
||||
const FLOOR: int = 1
|
||||
const RAMP: int = 2
|
||||
const ROOF: int = 3
|
||||
const BREAKWATER: int = 4
|
||||
|
||||
const SLOT_FLOOR: int = 0
|
||||
const SLOT_WALL_X: int = 1
|
||||
const SLOT_WALL_Z: int = 2
|
||||
const SLOT_VOLUME: int = 3
|
||||
|
||||
## Facings: the way a ramp rises, matching yaw (0 is +z, a quarter turn is +x).
|
||||
const FACING_DIRECTIONS: Array[Vector2i] = [Vector2i(0, 1), Vector2i(1, 0), Vector2i(0, -1), Vector2i(-1, 0)]
|
||||
## Boxes closer than this count as touching.
|
||||
const TOUCH: float = 0.05
|
||||
## Roof tiers: inset from the cell edge and height of each stacked slab, in metres.
|
||||
const ROOF_TIERS: Array[Vector2] = [Vector2(0.0, 0.3), Vector2(0.7, 0.3), Vector2(1.4, 0.3)]
|
||||
|
||||
## A placed piece.
|
||||
class Piece:
|
||||
extends RefCounted
|
||||
var id: int = 0
|
||||
var kind: int = 0
|
||||
var material: int = 0
|
||||
var slot: Vector4i = Vector4i.ZERO
|
||||
var facing: int = 0
|
||||
var owner: int = 0
|
||||
var health: int = 0
|
||||
var max_health: int = 0
|
||||
var placed_tick: int = 0
|
||||
var boxes: Array[AABB] = []
|
||||
var solid_ids: PackedInt32Array = PackedInt32Array()
|
||||
## Touches the terrain.
|
||||
var grounded: bool = false
|
||||
|
||||
## Piece ID -> Piece, in ascending ID order.
|
||||
var pieces: Dictionary = {}
|
||||
## Piece ID -> PackedInt32Array of touching piece IDs, ascending.
|
||||
var neighbours: Dictionary = {}
|
||||
## Removed piece IDs, in the order they went, for views to catch up on.
|
||||
var removed: PackedInt32Array = PackedInt32Array()
|
||||
|
||||
var _next_id: int = 1
|
||||
var _by_slot: Dictionary = {}
|
||||
## SimGround solid ID -> piece ID.
|
||||
var _by_solid: Dictionary = {}
|
||||
|
||||
|
||||
static func cell_size() -> float:
|
||||
return Tuning.GRID_CELL_METRES
|
||||
|
||||
|
||||
static func slot_type_of(kind: int) -> int:
|
||||
match kind:
|
||||
FLOOR:
|
||||
return SLOT_FLOOR
|
||||
RAMP, ROOF:
|
||||
return SLOT_VOLUME
|
||||
return -1
|
||||
|
||||
|
||||
static func is_wall_kind(kind: int) -> bool:
|
||||
return kind == WALL or kind == BREAKWATER
|
||||
|
||||
|
||||
static func cost_of(kind: int) -> int:
|
||||
return Tuning.BUILD_PIECES[KINDS[kind]]["cost"]
|
||||
|
||||
|
||||
static func max_health_of(material: int) -> int:
|
||||
return Tuning.MATERIALS[Materials.NAMES[material]]["health"]
|
||||
|
||||
|
||||
func count() -> int:
|
||||
return pieces.size()
|
||||
|
||||
|
||||
func find(piece_id: int) -> Piece:
|
||||
return pieces.get(piece_id)
|
||||
|
||||
|
||||
## The piece in a slot, or 0.
|
||||
func at_slot(slot: Vector4i) -> int:
|
||||
return _by_slot.get(slot, 0)
|
||||
|
||||
|
||||
## True if the slot, or the same slot a level above or below, holds a piece.
|
||||
func occupied(slot: Vector4i) -> bool:
|
||||
for dy: int in [-1, 0, 1]:
|
||||
if _by_slot.has(Vector4i(slot.x, slot.y + dy, slot.z, slot.w)):
|
||||
return true
|
||||
return false
|
||||
|
||||
|
||||
## The piece whose box is ground solid `solid_id`, or 0.
|
||||
func piece_of_solid(solid_id: int) -> int:
|
||||
return _by_solid.get(solid_id, 0)
|
||||
|
||||
|
||||
func next_id() -> int:
|
||||
return _next_id
|
||||
|
||||
|
||||
## The collision boxes a piece of `kind` in `slot` would have, before any skirt.
|
||||
static func boxes_for(kind: int, slot: Vector4i, facing: int) -> Array[AABB]:
|
||||
var g: float = cell_size()
|
||||
var base: float = slot.y * Tuning.BUILD_LEVEL_METRES
|
||||
var boxes: Array[AABB] = []
|
||||
match kind:
|
||||
WALL, BREAKWATER:
|
||||
var t: float = Tuning.BREAKWATER_THICKNESS if kind == BREAKWATER else Tuning.WALL_THICKNESS
|
||||
if slot.w == SLOT_WALL_X:
|
||||
boxes.append(AABB(Vector3(slot.x * g - t * 0.5, base, slot.z * g - t * 0.5), Vector3(t, g, g + t)))
|
||||
else:
|
||||
boxes.append(AABB(Vector3(slot.x * g - t * 0.5, base, slot.z * g - t * 0.5), Vector3(g + t, g, t)))
|
||||
FLOOR:
|
||||
boxes.append(AABB(Vector3(slot.x * g, base, slot.z * g), Vector3(g, Tuning.FLOOR_THICKNESS, g)))
|
||||
RAMP:
|
||||
var steps: int = Tuning.RAMP_STEPS
|
||||
var depth: float = g / steps
|
||||
var direction: Vector2i = FACING_DIRECTIONS[facing]
|
||||
for step: int in steps:
|
||||
var rise: float = (step + 1) * depth
|
||||
# Distance along the facing of this step's near edge, from the cell's low side.
|
||||
var along: float = step * depth
|
||||
var x0: float = slot.x * g
|
||||
var z0: float = slot.z * g
|
||||
var box: AABB
|
||||
if direction.x != 0:
|
||||
var start: float = x0 + along if direction.x > 0 else x0 + g - along - depth
|
||||
box = AABB(Vector3(start, base, z0), Vector3(depth, rise, g))
|
||||
else:
|
||||
var start_z: float = z0 + along if direction.y > 0 else z0 + g - along - depth
|
||||
box = AABB(Vector3(x0, base, start_z), Vector3(g, rise, depth))
|
||||
boxes.append(box)
|
||||
ROOF:
|
||||
var y: float = base
|
||||
for tier: Vector2 in ROOF_TIERS:
|
||||
boxes.append(AABB(Vector3(slot.x * g + tier.x, y, slot.z * g + tier.x), Vector3(g - tier.x * 2.0, tier.y, g - tier.x * 2.0)))
|
||||
y += tier.y
|
||||
return boxes
|
||||
|
||||
|
||||
## A wall or breakwater standing over lower terrain gets a skirt down to the terrain,
|
||||
## no deeper than one cell, so ground-level walls leave no gap underneath. Returns the
|
||||
## skirt box, or an empty AABB when none is needed.
|
||||
static func skirt_for(kind: int, wall_box: AABB, ground: SimGround) -> AABB:
|
||||
if not is_wall_kind(kind):
|
||||
return AABB()
|
||||
var lowest: float = INF
|
||||
for fx: float in [0.0, 0.25, 0.5, 0.75, 1.0]:
|
||||
for fz: float in [0.0, 0.5, 1.0]:
|
||||
var x: float = lerpf(wall_box.position.x, wall_box.end.x, fx if wall_box.size.x > wall_box.size.z else fz)
|
||||
var z: float = lerpf(wall_box.position.z, wall_box.end.z, fz if wall_box.size.x > wall_box.size.z else fx)
|
||||
lowest = minf(lowest, ground.terrain_height(x, z))
|
||||
var gap: float = wall_box.position.y - lowest
|
||||
if gap <= 0.0 or gap > cell_size():
|
||||
return AABB()
|
||||
var bottom: float = lowest - 0.1
|
||||
return AABB(Vector3(wall_box.position.x, bottom, wall_box.position.z),
|
||||
Vector3(wall_box.size.x, wall_box.position.y - bottom, wall_box.size.z))
|
||||
|
||||
|
||||
## True if any of `boxes` reaches down to the terrain.
|
||||
static func touches_terrain(boxes: Array[AABB], ground: SimGround) -> bool:
|
||||
for box: AABB in boxes:
|
||||
for fx: float in [0.0, 0.25, 0.5, 0.75, 1.0]:
|
||||
for fz: float in [0.0, 0.25, 0.5, 0.75, 1.0]:
|
||||
var x: float = lerpf(box.position.x, box.end.x, fx)
|
||||
var z: float = lerpf(box.position.z, box.end.z, fz)
|
||||
if ground.terrain_height(x, z) >= box.position.y - TOUCH:
|
||||
return true
|
||||
return false
|
||||
|
||||
|
||||
## IDs of pieces whose boxes touch any of `boxes`, ascending, without repeats.
|
||||
func touching(boxes: Array[AABB], ground: SimGround) -> PackedInt32Array:
|
||||
var found: Dictionary = {}
|
||||
for box: AABB in boxes:
|
||||
var grown: AABB = box.grow(TOUCH)
|
||||
for solid_id: int in ground.solids_near(grown.position.x, grown.position.z, grown.end.x, grown.end.z):
|
||||
var other: int = piece_of_solid(solid_id)
|
||||
if other != 0 and not found.has(other) and grown.intersects(ground.solids[solid_id]):
|
||||
found[other] = true
|
||||
var ids: PackedInt32Array = PackedInt32Array(found.keys())
|
||||
ids.sort()
|
||||
return ids
|
||||
|
||||
|
||||
## Adds a piece, its solids and its neighbour links. The caller has validated it.
|
||||
func add(kind: int, material: int, slot: Vector4i, facing: int, owner: int, tick: int, ground: SimGround) -> Piece:
|
||||
var piece: Piece = Piece.new()
|
||||
piece.id = _next_id
|
||||
_next_id += 1
|
||||
piece.kind = kind
|
||||
piece.material = material
|
||||
piece.slot = slot
|
||||
piece.facing = facing
|
||||
piece.owner = owner
|
||||
piece.placed_tick = tick
|
||||
piece.max_health = max_health_of(material)
|
||||
piece.health = piece.max_health
|
||||
piece.boxes = boxes_for(kind, slot, facing)
|
||||
if is_wall_kind(kind):
|
||||
var skirt: AABB = skirt_for(kind, piece.boxes[0], ground)
|
||||
if skirt.size != Vector3.ZERO:
|
||||
piece.boxes.append(skirt)
|
||||
piece.grounded = touches_terrain(piece.boxes, ground)
|
||||
var links: PackedInt32Array = touching(piece.boxes, ground)
|
||||
for box: AABB in piece.boxes:
|
||||
var solid_id: int = ground.add_solid(box)
|
||||
piece.solid_ids.append(solid_id)
|
||||
_by_solid[solid_id] = piece.id
|
||||
pieces[piece.id] = piece
|
||||
_by_slot[slot] = piece.id
|
||||
neighbours[piece.id] = links
|
||||
for other: int in links:
|
||||
var theirs: PackedInt32Array = neighbours[other]
|
||||
theirs.append(piece.id)
|
||||
neighbours[other] = theirs
|
||||
return piece
|
||||
|
||||
|
||||
## Removes a piece, its solids and its neighbour links. Returns false if unknown.
|
||||
func remove(piece_id: int, ground: SimGround) -> bool:
|
||||
var piece: Piece = pieces.get(piece_id)
|
||||
if piece == null:
|
||||
return false
|
||||
for solid_id: int in piece.solid_ids:
|
||||
ground.remove_solid(solid_id)
|
||||
_by_solid.erase(solid_id)
|
||||
for other: int in neighbours[piece_id]:
|
||||
var theirs: PackedInt32Array = neighbours[other]
|
||||
theirs.remove_at(theirs.find(piece_id))
|
||||
neighbours[other] = theirs
|
||||
neighbours.erase(piece_id)
|
||||
_by_slot.erase(piece.slot)
|
||||
pieces.erase(piece_id)
|
||||
removed.append(piece_id)
|
||||
return true
|
||||
|
||||
|
||||
## Appends every piece to a hash buffer in ID order.
|
||||
func write_state(buffer: StreamPeerBuffer) -> void:
|
||||
buffer.put_64(_next_id)
|
||||
buffer.put_64(pieces.size())
|
||||
for piece: Piece in pieces.values():
|
||||
buffer.put_64(piece.id)
|
||||
buffer.put_u8(piece.kind)
|
||||
buffer.put_u8(piece.material)
|
||||
buffer.put_u8(piece.facing)
|
||||
for value: int in [piece.slot.x, piece.slot.y, piece.slot.z, piece.slot.w]:
|
||||
buffer.put_32(value)
|
||||
buffer.put_64(piece.owner)
|
||||
buffer.put_32(piece.health)
|
||||
buffer.put_64(piece.placed_tick)
|
||||
@@ -0,0 +1 @@
|
||||
uid://co6d50yd1osd1
|
||||
@@ -201,6 +201,26 @@ const MATERIALS: Dictionary = {
|
||||
"stone": {"health": 300, "build_seconds": 5.0},
|
||||
"salvage_iron": {"health": 500, "build_seconds": 9.0},
|
||||
}
|
||||
## Pieces are GRID_CELL_METRES on a side and tall, and snap across to the grid. Up and
|
||||
## down they snap to levels BUILD_LEVEL_METRES apart, half a cell, so a piece built on
|
||||
## the ground is never more than a metre above or below the builder's feet. Level 0 is
|
||||
## the starting sea level; levels run from BUILD_MIN_LEVEL to BUILD_MAX_LEVEL.
|
||||
const BUILD_LEVEL_METRES: float = 2.0
|
||||
const BUILD_MIN_LEVEL: int = -8
|
||||
const BUILD_MAX_LEVEL: int = 63
|
||||
## A piece's centre must be within this distance of the builder's eye.
|
||||
const BUILD_RANGE: float = 9.5
|
||||
## Ticks between placements while fire is held: 10 pieces a second.
|
||||
const BUILD_INTERVAL_TICKS: int = 3
|
||||
## Looking further up than this, in degrees, targets the level above.
|
||||
const BUILD_LOOK_UP_DEGREES: float = 35.0
|
||||
## Looking further down than this puts floors, ramps and roofs in the builder's own cell.
|
||||
const BUILD_LOOK_DOWN_DEGREES: float = 40.0
|
||||
const WALL_THICKNESS: float = 0.3
|
||||
const BREAKWATER_THICKNESS: float = 0.6
|
||||
const FLOOR_THICKNESS: float = 0.2
|
||||
## Ramps are stairs of this many steps, so each riser can be stepped up.
|
||||
const RAMP_STEPS: int = 10
|
||||
const BREAKWATER_MAX_HEAD: float = 6.0
|
||||
const BREAKWATER_WEAR_PER_METRE: float = 2.0
|
||||
const BREACH_FLOW_METRES_PER_SECOND: float = 1.5
|
||||
|
||||
Reference in New Issue
Block a user