W1: Third-person character controller and camera

Simulation (src/sim/):
- SimGround holds the terrain heightfield (bilinear heights, normals)
  and axis-aligned box solids, with support, body-overlap, point and
  ray queries. The island generator and building will fill it.
- Movement steps a player per tick: walk, sprint (forward only),
  crouch (lower body, slower, no jump), jump with exact constant-gravity
  integration, air control, step-up onto ledges up to STEP_HEIGHT,
  ground snapping on downhill walks, slopes over MAX_SLOPE_DEGREES that
  block walking and jumping uphill and make players slide (speed capped),
  ceiling bumps, sliding along walls, and fall damage from impact speed.
- Gravity now applies on ticks with no command. on_ground and crouching
  are part of the state hash. New movement numbers are in Tuning.
- Fixed the strafe direction: right is forward x up in Godot's frame,
  (-cos yaw, 0, sin yaw). Documented the look convention.

Client (src/client/):
- CameraRig places an over-the-shoulder camera with an eased
  aim-down-sights blend (closer, narrower FOV), casting against the same
  SimGround: pivot to shoulder, shoulder back, then a straight line from
  the pivot, with a final clearance pull-in so the near plane never
  enters geometry.
- InputSettings: mouse sensitivity, aim sensitivity scale and invert-Y,
  clamped and saved to user://settings.cfg. PlayerCamera applies both.

Tests: 46 new across movement, ground queries, camera and settings,
including a 24,480-view scripted camera sweep through five arenas (wall,
corridor, low roof, corner, steep bank) that checks the eye and every
near-plane corner stay out of geometry with a clear line to the pivot.
The hash test now flips a high stick bit, because a 1/127 nudge to an
airborne player moves them less than the hash's millimetre.
Capture scenarios camera, camera_wall and camera_aim.

Closes #8

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
2026-11-09 20:24:02 -05:00
co-authored by Claude Opus 5.5
parent 68635d5fba
commit 70e88cec8a
29 changed files with 1213 additions and 23 deletions
+195
View File
@@ -0,0 +1,195 @@
## Everything solid that players stand on, walk into and see through: a terrain
## heightfield plus axis-aligned box solids (structures, rocks). The island generator
## fills the heightfield; building adds and removes solids.
##
## All queries are pure functions of the stored data, so the server, client prediction
## and the camera all agree.
class_name SimGround
extends RefCounted
## Ray-marching step for terrain, in metres. Small enough for camera-length rays.
const RAY_STEP: float = 0.05
const RAY_REFINE_STEPS: int = 10
const _MARGIN_OFFSETS: Array[Vector2] = [
Vector2(1.0, 0.0), Vector2(-1.0, 0.0), Vector2(0.0, 1.0), Vector2(0.0, -1.0),
Vector2(0.7071, 0.7071), Vector2(0.7071, -0.7071), Vector2(-0.7071, 0.7071), Vector2(-0.7071, -0.7071),
]
## Heights in row-major order: index = z * samples + x, `cell` metres apart, starting
## at the world origin. Outside the grid the nearest edge sample is used.
var heights: PackedFloat32Array = PackedFloat32Array()
var samples: int = 0
var cell: float = 1.0
var solids: Array[AABB] = []
## A flat world at `height`.
static func flat(height: float = 0.0) -> SimGround:
var ground: SimGround = SimGround.new()
ground.samples = 2
ground.cell = Tuning.WORLD_SIZE_METRES
ground.heights = PackedFloat32Array([height, height, height, height])
return ground
## A heightfield of `side` x `side` samples spaced `spacing` metres apart.
static func from_heights(values: PackedFloat32Array, side: int, spacing: float) -> SimGround:
assert(side >= 2 and values.size() == side * side and spacing > 0.0)
var ground: SimGround = SimGround.new()
ground.heights = values
ground.samples = side
ground.cell = spacing
return ground
func add_solid(box: AABB) -> void:
solids.append(box.abs())
## Terrain height at (x, z), bilinearly interpolated.
func terrain_height(x: float, z: float) -> float:
var limit: float = float(samples - 1)
var gx: float = clampf(x / cell, 0.0, limit)
var gz: float = clampf(z / cell, 0.0, limit)
var x0: int = mini(floori(gx), samples - 2)
var z0: int = mini(floori(gz), samples - 2)
var fx: float = gx - x0
var fz: float = gz - z0
var row: int = z0 * samples
var h00: float = heights[row + x0]
var h10: float = heights[row + x0 + 1]
var h01: float = heights[row + samples + x0]
var h11: float = heights[row + samples + x0 + 1]
return lerpf(lerpf(h00, h10, fx), lerpf(h01, h11, fx), fz)
## Upward terrain normal at (x, z), from central differences.
func terrain_normal(x: float, z: float) -> Vector3:
var d: float = minf(cell * 0.5, 0.5)
var dx: float = terrain_height(x + d, z) - terrain_height(x - d, z)
var dz: float = terrain_height(x, z + d) - terrain_height(x, z - d)
return Vector3(-dx, 2.0 * d, -dz).normalized()
## True if the terrain at (x, z) is gentle enough to stand on.
func walkable_terrain(x: float, z: float) -> bool:
return terrain_normal(x, z).y >= cos(deg_to_rad(Tuning.MAX_SLOPE_DEGREES))
## The highest surface under (x, z) that is no higher than `max_y`: the terrain, or the
## top of a solid. Solid tops are always walkable.
func support_height(x: float, z: float, max_y: float) -> float:
var best: float = terrain_height(x, z)
for box: AABB in solids:
var top: float = box.end.y
if top > best and top <= max_y and _inside_footprint(box, x, z, 0.0):
best = top
return best
## True when the best support under (x, z) up to `max_y` is the top of a solid.
func support_is_solid(x: float, z: float, max_y: float) -> bool:
var terrain: float = terrain_height(x, z)
for box: AABB in solids:
var top: float = box.end.y
if top > terrain and top <= max_y and _inside_footprint(box, x, z, 0.0):
return true
return false
## True if a player body at `feet` overlaps a solid. Solids whose top is within
## `step` of the feet don't count, so they can be stepped onto.
func body_blocked(feet: Vector3, radius: float, height: float, step: float) -> bool:
for box: AABB in solids:
if box.end.y <= feet.y + step or box.position.y >= feet.y + height:
continue
if _inside_footprint(box, feet.x, feet.z, radius):
return true
return false
## Casts from `from` to `to` against terrain and solids. Returns the fraction of the way
## to the first hit, or 1.0 if nothing is hit. A ray starting inside something returns 0.
func raycast(from: Vector3, to: Vector3) -> float:
var nearest: float = 1.0
for box: AABB in solids:
nearest = minf(nearest, _ray_box(from, to, box))
return minf(nearest, _ray_terrain(from, to, nearest))
## True if `point` is inside the terrain or a solid, or within `margin` of one. For the
## terrain, heights are also checked `margin` away on each side, so steep ground counts
## its sideways distance and not just the height under the point.
func point_inside(point: Vector3, margin: float = 0.0) -> bool:
if point.y < terrain_height(point.x, point.z) + margin:
return true
if margin > 0.0:
for offset: Vector2 in _MARGIN_OFFSETS:
var probe: Vector2 = offset * margin
if point.y < terrain_height(point.x + probe.x, point.z + probe.y):
return true
for box: AABB in solids:
if box.grow(margin).has_point(point):
return true
return false
func _inside_footprint(box: AABB, x: float, z: float, radius: float) -> bool:
return (
x > box.position.x - radius and x < box.end.x + radius
and z > box.position.z - radius and z < box.end.z + radius
)
## Slab test. Returns the entry fraction in [0, 1], or 1.0 for a miss.
func _ray_box(from: Vector3, to: Vector3, box: AABB) -> float:
var direction: Vector3 = to - from
var enter: float = 0.0
var leave: float = 1.0
for axis: int in 3:
var start: float = from[axis]
var span: float = direction[axis]
var low: float = box.position[axis]
var high: float = box.end[axis]
if absf(span) < 0.000001:
if start < low or start > high:
return 1.0
continue
var t1: float = (low - start) / span
var t2: float = (high - start) / span
enter = maxf(enter, minf(t1, t2))
leave = minf(leave, maxf(t1, t2))
if enter > leave:
return 1.0
return enter
## Marches the ray up to `limit`, then refines the first crossing below the terrain.
func _ray_terrain(from: Vector3, to: Vector3, limit: float) -> float:
var length: float = from.distance_to(to)
if length <= 0.0:
return 0.0 if _below_terrain(from) else 1.0
if _below_terrain(from):
return 0.0
var step: float = RAY_STEP / length
var previous: float = 0.0
var t: float = step
while previous < limit:
t = minf(t, limit)
if _below_terrain(from.lerp(to, t)):
var low: float = previous
var high: float = t
for _index: int in RAY_REFINE_STEPS:
var middle: float = (low + high) * 0.5
if _below_terrain(from.lerp(to, middle)):
high = middle
else:
low = middle
return low
previous = t
t += step
return 1.0
func _below_terrain(point: Vector3) -> bool:
return point.y < terrain_height(point.x, point.z)