Ashlar checks / tooling (push) Successful in 9s
New [Game] sprint setting, on by default, with sprint speed multiplier (1.4 times run speed), sprint fatigue drain (10 per second on top of running, halved at Athletics 100) and sprint fatigue threshold (0.1 of maximum fatigue to start). A sprint ends when fatigue falls below 1% of maximum; regeneration keeps fatigue just above 0 while running, so exactly 0 is never reached. Sprint is engine action 52, Lua input.ACTION.Sprint and the player's 'Sprint' Lua action, with self.controls.sprint. Defaults are Left Alt and D-pad up, because L3 is already Sneak. Sprinting needs forward movement within 45 degrees, and isn't possible while sneaking, in the block stance, swimming, levitating, knocked down or paralyzed. Pressing Use with a weapon or spell ready ends the sprint until Sprint is released, so no attack starts while sprinting. A sprint counts as running for animations, Athletics and the running fatigue cost. AI doesn't sprint. With the setting off the control does nothing. The rules are in mwmechanics/sprint.cpp with unit tests. The movement scenario gains sprint, tiredsprint and sprintuse phases, run in a circle from the start point so the player stays on land. Closes #27 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
270 lines
12 KiB
YAML
270 lines
12 KiB
YAML
# Console
|
||
|
||
ConsoleWindow: "Console"
|
||
|
||
# Debug window
|
||
|
||
DebugWindow: "Debug"
|
||
LogViewer: "Log Viewer"
|
||
LuaProfiler: "Lua Profiler"
|
||
PhysicsProfiler: "Physics Profiler"
|
||
|
||
|
||
# Messages
|
||
|
||
AskLoadLastSave: "The most recent save is ''{save}''. Do you want to load it?"
|
||
BuildingNavigationMesh: "Building Navigation Mesh"
|
||
InitializingData: "Initializing Data..."
|
||
LoadingExterior: "Loading Area"
|
||
LoadingFailed: "Failed to load saved game"
|
||
LoadingInterior: "Loading Area"
|
||
LoadingInProgress: "Loading Save Game"
|
||
LoadingRequiresNewVersionError: |-
|
||
This save file was created using a newer version of OpenMW and is thus not supported.
|
||
Please upgrade to the newest OpenMW version to load this file.
|
||
LoadingRequiresOldVersionError: |-
|
||
This save file was created using an older version of OpenMW in a format that is no longer supported.
|
||
Load and save this file using {version} to upgrade it.
|
||
NewGameConfirmation: "Do you want to start a new game and lose the current one?"
|
||
QuitGameConfirmation: "Quit the game?"
|
||
SaveGameDenied: "The game cannot be saved right now."
|
||
SavingInProgress: "Saving..."
|
||
ScreenshotFailed: "Failed to save screenshot"
|
||
ScreenshotMade: "{file} has been saved"
|
||
|
||
|
||
# Save game menu
|
||
|
||
DeleteGame: "Delete Game"
|
||
DeleteGameConfirmation: "Are you sure you want to delete this saved game?"
|
||
EmptySaveNameError: "Game can not be saved without a name!"
|
||
Health: "Health"
|
||
Level: "Level"
|
||
LoadGameConfirmation: "Do you want to load a saved game and lose the current one?"
|
||
MissingContentFilesConfirmation: |-
|
||
The currently selected content files do not match the ones used by this save game.
|
||
Errors may occur during load or game play.
|
||
Do you wish to continue?
|
||
MissingContentFilesList: |-
|
||
{files, plural,
|
||
one{\n\nFound missing file: }
|
||
few{\n\nFound {files} missing files:\n}
|
||
other{\n\nFound {files} missing files:\n}
|
||
}
|
||
MissingContentFilesListCopy: |-
|
||
{files, plural,
|
||
one{\n\nPress Copy to place its name to the clipboard.}
|
||
few{\n\nPress Copy to place their names to the clipboard.}
|
||
other{\n\nPress Copy to place their names to the clipboard.}
|
||
}
|
||
OverwriteGameConfirmation: "Are you sure you want to overwrite this saved game?"
|
||
SelectCharacter: "Select Character..."
|
||
TimePlayed: "Time Played"
|
||
|
||
|
||
# Settings menu
|
||
|
||
ActorsProcessingRange: "Actors Processing Range"
|
||
ActorsProcessingRangeValue: "Actors Processing Range ({value, number, :: group-off})"
|
||
Anisotropy: "Anisotropy"
|
||
Audio: "Audio"
|
||
AudioEffects: "Effects"
|
||
AudioFootsteps: "Footsteps"
|
||
AudioMaster: "Master"
|
||
AudioMusic: "Music"
|
||
AudioVoice: "Voice"
|
||
AutoSaveOnResting: "Auto-Save on Resting"
|
||
BestAttack: "Always Use Best Attack"
|
||
CameraSensitivity: "Camera Sensitivity"
|
||
CameraZoomIn: "Zoom Camera In"
|
||
CameraZoomOut: "Zoom Camera Out"
|
||
ChangeRequiresRestart: "This change requires a restart to take effect."
|
||
ClampLighting: "Clamp Lighting"
|
||
ClampLightingTooltip: |-
|
||
Cap lighting brightness at (1, 1, 1) to replicate Morrowind's rendering.
|
||
Prevents overly bright or shifted colors but can dull lighting.
|
||
ClassicFalloff: "Classic Falloff"
|
||
ClassicFalloffTooltip: |-
|
||
Default: off
|
||
Use the traditional point light attenuation formula which lacks an early fade out.
|
||
|
||
A flaw of the traditional formula is that light influence never quite reaches zero.
|
||
This is physically accurate, but can cause lighting seams because lights do not affect the entire scene.
|
||
Early fade out helps diminish these seams at the cost of darkening the scene.
|
||
|
||
Morrowind uses the traditional formula, so you may want to enable this if you dislike the brightness differences.
|
||
Alternatively, try changing the minimum interior brightness.
|
||
ConfirmResetBindings: "Reset all controls to the default?"
|
||
ConfirmResolution: "New resolution will be applied immediately. Do you want to continue?"
|
||
Controller: "Controller"
|
||
Controls: "Controls"
|
||
Crosshair: "Crosshair"
|
||
DelayLow: "Fast"
|
||
DelayHigh: "Slow"
|
||
DetailLevel: "Detail Level"
|
||
Difficulty: "Difficulty"
|
||
DifficultyValue: "Difficulty ({value})"
|
||
DifficultyEasy: "Easy"
|
||
DifficultyHard: "Hard"
|
||
DistanceHigh: "Far"
|
||
DistanceLow: "Near"
|
||
EnableController: "Enable Controller"
|
||
FieldOfView: "Field of View"
|
||
FieldOfViewValue: "Field of View ({value, number, ::.00})"
|
||
FieldOfViewHigh: "High"
|
||
FieldOfViewLow: "Low"
|
||
ForcePerPixelLighting: "Per-Pixel Lighting"
|
||
ForcePerPixelLightingTooltip: |-
|
||
Force the use of per-pixel lighting. By default, only bump- and normal-mapped objects use per-pixel lighting.
|
||
|
||
Enabling per-pixel lighting results in visual differences to the original engine as certain lights in Morrowind rely on vertex lighting to look as intended.
|
||
|
||
Note that groundcover shaders and particle effects ignore this setting.
|
||
FrameRateHint: "Hint: press F3 to show\nthe current frame rate."
|
||
GammaCorrection: "Gamma Correction"
|
||
GammaCorrectionValue: "Gamma Correction ({value, number, ::.00})"
|
||
GammaDark: "Dark"
|
||
GammaLight: "Light"
|
||
GmstOverridesL10n: "Strings From ESM Files Have Priority"
|
||
InvertXAxis: "Invert X Axis"
|
||
InvertYAxis: "Invert Y Axis"
|
||
Language: "Language"
|
||
LanguageNote: "Note: these settings do not affect strings from ESM files."
|
||
LightsClusteredLighting: "Clustered Lighting"
|
||
LightingResetToDefaults: "Resets to default values, would you like to continue?"
|
||
Lights: "Lights"
|
||
LightRadiusMultiplier: "Radius Multiplier"
|
||
LightRadiusMultiplierValue: "Radius Multiplier ({value, number, ::.00})"
|
||
LightRadiusMultiplierTooltip: "Default: 1.75\nMultiplier for point light radius. Larger values will increase the range of lights."
|
||
LightsFadeStartMultiplier: "Fade Start Multiplier"
|
||
LightsFadeStartMultiplierValue: "Fade Start Multiplier ({value, number, ::.00})"
|
||
LightsFadeStartMultiplierTooltip: "Default: 0.85\nFraction of maximum distance at which lights will start to fade.\n\nSet this to a low value for slower transitions or a high value for quicker transitions."
|
||
LightsClusteredLightingTooltip: |-
|
||
Enable clustered lighting.
|
||
Divides the screen into regions to assign lights, removing per-object light limits.
|
||
|
||
Classic falloff and max light options do not apply in this mode.
|
||
|
||
Enables point light specular highlights on the water plane when the water shader is enabled.
|
||
|
||
It is highly recommended to use this with per-pixel lighting enabled, as vertex lighting can cause light pop at screen edges.
|
||
LightsMaximumDistance: "Maximum Light Distance"
|
||
LightsMaximumDistanceValue: "Maximum Light Distance ({value, number, :: group-off})"
|
||
LightsMaximumDistanceTooltip: "Default: 8192\nMaximum distance at which lights will appear (measured in units).\n\nSet this to 0 to use an unlimited distance."
|
||
LightsMinimumInteriorBrightness: "Minimum Interior Brightness"
|
||
LightsMinimumInteriorBrightnessValue: "Minimum Interior Brightness ({value, number, ::.00})"
|
||
LightsMinimumInteriorBrightnessTooltip: "Default: 0.08\nMinimum ambient interior brightness.\n\nIncrease this if you feel interiors are too dark.\n\nThis has no effect if classic falloff is used."
|
||
MatchSunlightToSun: "Match Sunlight to Sun"
|
||
MatchSunlightToSunTooltip: |-
|
||
In Morrowind, the apparent sun position does not match its light direction due to mysterious reasons.
|
||
We preserve this unrealistic behavior for compatibility.
|
||
|
||
This option makes the sun light source's position match the sun's position.
|
||
MaxLights: "Max Lights"
|
||
MaxLightsValue: "Max Lights ({value, number, :: group-off})"
|
||
MaxLightsTooltip: "Default: 16\nMaximum number of lights per object.\n\nA low number near default will cause light popping similar to what you would see in Morrowind."
|
||
MenuHelpDelay: "Menu Help Delay"
|
||
MenuTransparency: "Menu Transparency"
|
||
MouseAndKeyboard: "Mouse/Keyboard"
|
||
MouseEmulationCursor: "Mouse Emulation Cursor"
|
||
ParticlePointLighting: "Particle Point Lighting"
|
||
ParticlePointLightingTooltip: "Allows particle systems to be lit by point lights."
|
||
PostProcessing: "Post Processing"
|
||
PostProcessingIsNotEnabled: "Postprocessor is not enabled"
|
||
PostProcessingTooltip: "Tweaked via Post Processor HUD, see input bindings."
|
||
Preferences: "Prefs"
|
||
PrimaryLanguage: "Primary Language"
|
||
PrimaryLanguageTooltip: "Localization files for this language have the highest priority."
|
||
QualityHigh: "High"
|
||
QualityLow: "Low"
|
||
QualityMedium: "Medium"
|
||
RainRippleDetail: "Rain Ripple Detail"
|
||
RainRippleDetailDense: "Dense"
|
||
RainRippleDetailSimple: "Simple"
|
||
RainRippleDetailSparse: "Sparse"
|
||
RebindAction: "Press a key or button to rebind this control."
|
||
ReflectionShaderDetail: "Reflection Shader Detail"
|
||
ReflectionShaderDetailActors: "Actors"
|
||
ReflectionShaderDetailGroundcover: "Groundcover"
|
||
ReflectionShaderDetailObjects: "Objects"
|
||
ReflectionShaderDetailSky: "Sky"
|
||
ReflectionShaderDetailTerrain: "Terrain"
|
||
ReflectionShaderDetailWorld: "World"
|
||
Refraction: "Refraction"
|
||
ResetControls: "Reset Controls"
|
||
Screenshot: "Screenshot"
|
||
Scripts: "Scripts"
|
||
ScriptsDisabled: "Load a game to access script settings."
|
||
SecondaryLanguage: "Secondary Language"
|
||
SecondaryLanguageTooltip: "Localization files for this language may be used if the primary language files lack the necessary lines."
|
||
SensitivityHigh: "High"
|
||
SensitivityLow: "Low"
|
||
SettingsWindow: "Options"
|
||
Subtitles: "Subtitles"
|
||
SunlightScattering: "Sunlight Scattering"
|
||
TestingExteriorCells: "Testing Exterior Cells"
|
||
TestingInteriorCells: "Testing Interior Cells"
|
||
TextureFiltering: "Texture Filtering"
|
||
TextureFilteringBilinear: "Bilinear"
|
||
TextureFilteringNearest: "Nearest"
|
||
TextureFilteringDisabled: "None"
|
||
TextureFilteringOther: "Other"
|
||
TextureFilteringTrilinear: "Trilinear"
|
||
ToggleHUD: "Toggle HUD"
|
||
TogglePostProcessorHUD: "Toggle Post Processor HUD"
|
||
Block: "Block"
|
||
Sprint: "Sprint"
|
||
TransparencyFull: "Full"
|
||
TransparencyNone: "None"
|
||
Video: "Video"
|
||
ViewDistance: "View Distance"
|
||
ViewDistanceValue: "View Distance ({value, number, ::.00})"
|
||
ViewDistanceValueCells: "View Distance (×{cells, number, ::.00})"
|
||
VSync: "VSync"
|
||
VSyncAdaptive: "Adaptive"
|
||
Water: "Water"
|
||
WaterShader: "Water Shader"
|
||
WaterShaderTextureQuality: "Texture Quality"
|
||
WindowBorder: "Window Border"
|
||
WindowMode: "Window Mode"
|
||
WindowModeFullscreen: "Fullscreen"
|
||
WindowModeHint: "Hint: Windowed Fullscreen mode\nalways uses the native display resolution."
|
||
WindowModeWindowed: "Windowed"
|
||
WindowModeWindowedFullscreen: "Windowed Fullscreen"
|
||
WobblyShores: "Wobbly Shores"
|
||
|
||
# Shadow settings
|
||
|
||
Shadows: "Shadows"
|
||
ActorShadows: "Enable Actor Shadows"
|
||
ActorShadowsTooltip: "Enable shadows for NPCs and creatures besides the player character. May have a minor performance impact."
|
||
PlayerShadows: "Enable Player Shadows"
|
||
PlayerShadowsTooltip: "Enable shadows exclusively for the player character. May have a very minor performance impact."
|
||
TerrainShadows: "Enable Terrain Shadows"
|
||
TerrainShadowsTooltip: "Enable shadows for the terrain including distant terrain. May have a significant performance and shadow quality impact."
|
||
ObjectShadows: "Enable Object Shadows"
|
||
ObjectShadowsTooltip: "Enable shadows for primarily inanimate objects. May have a significant performance impact."
|
||
IndoorShadows: "Enable Indoor Shadows"
|
||
IndoorShadowsTooltip: "Due to limitations with Morrowind's data, only actors can cast shadows indoors, which some might feel is distracting. Has no effect if actor/player shadows are not enabled."
|
||
ShadowPlanesComputationMethod: "Shadow Planes Computation Method"
|
||
ShadowPlanesComputationMethodTooltip: |-
|
||
Type of "compute scene bounds" computation method to be used. Bounds (default) for a good balance between performance and shadow quality, primitives for better-looking shadows or none for no computation.
|
||
ShadowPlanesComputationMethodBounds: "Bounds"
|
||
ShadowPlanesComputationMethodPrimitives: "Primitives"
|
||
ShadowPlanesComputationMethodNone: "None"
|
||
ShadowPlanesComputationMethodWarning: "Using the primitives method will severely impact performance and is not recommended for normal gameplay."
|
||
ShadowMapResolution: "Shadow Map Resolution"
|
||
ShadowMapResolutionTooltip: "The resolution of each individual shadow map. Increasing it significantly improves shadow quality but may have a minor performance impact."
|
||
ShadowsMaxDistanceValue: "Shadow Distance Limit ({value, number, :: group-off})"
|
||
ShadowsMaxDistanceTooltip: "The distance from the camera at which shadows completely disappear. Set to 0 to disable."
|
||
|
||
# Controller button names
|
||
|
||
EnchantType: "Cast Type"
|
||
InventorySelect: "Put"
|
||
JournalQuests: "Quests"
|
||
JournalShowAll: "Show All"
|
||
LoadingSelectCharacter: "Change Character"
|
||
RechargeSelect: "Recharge"
|
||
RepairTool: "Tool"
|